Product overview
The GEPRC T-Cube18 2S WTFPV Kit is a micro quadcopter kit for custom Tinywhoop builds and indoor or outdoor flying. Its T-Cube18 frame has an 87mm wheelbase and a 1.5mm carbon fiber plate, with a specified weight of 34.5g±1g. The supplied configuration includes flight electronics, motors and propellers, making it an equipped flight-platform kit rather than an airframe-only package. Neither a camera nor a video transmitter is supplied, leaving those elements of the FPV configuration to the builder.
Control electronics comprise a TAKER F411-12A-E 1-2S AIO flight controller, STM32F411CEU6 MCU, ICM42688-P(SPI) gyroscope, 12A 8Bit ESC and built-in ELRS2.4G receiver. Propulsion uses SPEEDX2 1002 18000KV motors and HQProp 45MM propellers, alongside an XT30 battery connector. Camera integration requires compatible mounting hole spacing, with most standard layouts supported. The kit supports the majority of analog and HD tiny video transmitter systems, but DJI O4 Lite is specifically excluded. These provisions allow camera and transmitter selection within the stated mounting and system compatibility limits.
The recommended battery is LiHV 2S 380mAh. Flight duration is 3–5 minutes under low-speed cruising conditions, and actual duration varies with flying method. The package contains one T-Cube18 WTFPV Kit, an HQProp 45MM set of four propellers in two pairs, one star screwdriver, one 1.5mm L-shaped screwdriver and eight battery rubber bands. The separate specification entry lists HQProp 45MM x8 for the propellers; the included accessory set is listed as HQProp 45MM x4 (2pairs).
Specifications
| Specification | Value & conditions |
|---|---|
| Model | T-Cube18 2S WTFPV Kit |
| Frame | T-Cube18 |
| Wheelbase | 87mm |
| Flight controller | TAKER F411-12A-E 1-2S AIO |
| MCU | STM32F411CEU6 |
| Gyroscope | ICM42688-P(SPI) |
| ESC | 12A 8Bit ESC |
| Motor | SPEEDX2 1002 18000KV |
| Propellers | HQProp 45MM x8 |
| Battery connector | XT30 |
| Video transmitter supplied | None |
| Camera supplied | None |
| Receiver | Built-in ELRS2.4G |
| Weight | 34.5g±1g |
| Recommended battery | LiHV 2S 380mAh |
| Flight time | 3′-5′Based on low-speed cruise; actual times may vary with different flying methods. |
| Structural plate | 1.5mm carbon fiber plate |
| Camera integration | Supports a wide range of FPV cameras; most standard mounting layouts fit.Camera mounting hole spacing must be compatible. |
| Video transmitter integration | Supports the majority of analog and HD tiny VTX systems.Excludes DJI O4 Lite. |
| Intended use | Micro drone kit for custom FPV builds |
| Flying environments | Indoor and outdoor flying |
| Package contents | 1 x T-Cube18 WTFPV Kit; 1 x HQProp 45MM x4 (2pairs); 1 x star screwdriver; 1 x L-shaped screwdriver, 1.5mm; 8 x battery rubber bands |
Request a quote for GEPRC T-Cube18 2S WTFPV Kit Quadcopter with Built-in ELRS2.4G
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.