ChinaDrone.Request a quote ↗
COMPONENT

T-MOTOR VL8015 KV170

By T-MOTOR ↗

The T-MOTOR VL8015 KV170 is a brushless motor for light-to-medium lift VTOL and multirotor UAVs. It delivers up to 14.8kg thrust per motor on 12S systems and supports a 25kg MTOW quadrotor application. Integrated centrifugal cooling, temperature-resistant materials, IPX5 protection and electronic propeller locking with compatible ESCs define its integration features.

T-MOTOR VL8015 KV170 drone motor in an angled front view
T-MOTOR VL8015 KV170 drone motor in an angled front view
Manufacturer and modelT-MOTOR VL8015 KV170
Product type and applicationLarge brushless motor for light-to-medium lift VTOL and multirotor UAV platforms.
Thrust and aircraft application rangeUp to 14.8kg thrust per motor; suitable for a 25kg MTOW quadrotor UAV.12S power system; 25kg MTOW suitability applies to a quadrotor UAV.
Electronic propeller locking360° electronic propeller locking to reduce cruise drag and improve aerodynamic efficiency.Requires compatible ESCs; propeller locking applies during cruise flight.
High-temperature construction180°C magnets, 220°C enameled wire, and 150°C stator coating for continuous-load operation.
Thermal managementIntegrated centrifugal cooling to improve airflow and reduce temperature rise during sustained operation.

Product overview

The T-MOTOR VL8015 KV170 is a large brushless propulsion motor intended for light-to-medium lift VTOL aircraft and multirotor UAVs. Its applications include industrial aerial work, mapping and medium payload transport. Integration centers on a 12S power system, with up to 14.8kg thrust per motor and suitability for a quadrotor with 25kg maximum takeoff weight. The product is a motor component for aircraft integration; its electronic propeller-locking function requires compatible ESCs to hold propellers during cruise and reduce drag.

The motor combines integrated centrifugal cooling with temperature-resistant internal materials for sustained operation. Its construction uses 180°C magnets, 220°C enameled wire and a 150°C stator coating; these are component-specific temperature figures. Mechanical details include imported 6901 bearings and a ≤10mg dynamic balance standard, supporting smooth rotation with low vibration. IPX5 protection adds resistance to rain, snow and humidity. Together, these features address thermal management, rotational behavior and weather exposure in the intended outdoor UAV applications.

Specifications

SpecificationValue & conditions
Manufacturer and modelT-MOTOR VL8015 KV170
Product type and applicationLarge brushless motor for light-to-medium lift VTOL and multirotor UAV platforms.
Thrust and aircraft application rangeUp to 14.8kg thrust per motor; suitable for a 25kg MTOW quadrotor UAV.12S power system; 25kg MTOW suitability applies to a quadrotor UAV.
Electronic propeller locking360° electronic propeller locking to reduce cruise drag and improve aerodynamic efficiency.Requires compatible ESCs; propeller locking applies during cruise flight.
High-temperature construction180°C magnets, 220°C enameled wire, and 150°C stator coating for continuous-load operation.
Thermal managementIntegrated centrifugal cooling to improve airflow and reduce temperature rise during sustained operation.
Dynamic balance and bearings≤10mg dynamic balance standard with imported 6901 bearings.
Environmental protectionIPX5 protection rating; resistance against rain, snow, and humidity.

Ask for the T-MOTOR VL8015 KV170 price ↑

KEEP EXPLORING

Similar products

Browse all products ↗
GEPRC TAKER F722 BLS 65A V2 STACK flight controller and ESC board assembly
Flight control & navigation

GEPRC TAKER F722 BLS 65A V2 STACK

By GEPRC

The GEPRC TAKER F722 BLS 65A V2 STACK is a UAV electronics assembly pairing an F722 flight controller with a 65A four-in-one ESC. It provides DJI Air Unit connectivity, onboard logging and vibration-isolated mounting, with distinct board footprints and input-voltage limits that must be accommodated during integration.

Scorpion HK-3020 Shaft Kit with a metal shaft and retaining hardware in retail packaging
Motors & ESCs

HK-3020 Shaft Kit

By Scorpion

The Scorpion HK-3020 Shaft Kit supplies hardened steel replacement shafts measuring 5mm in diameter and 63mm long for HK-3020 helicopter motors. It fits both C-clip and retaining-collar versions. Shaft removal requires a bearing press or drill press, with the aluminum front housing supported to prevent warping.