Product overview
The GEPRC TAKER F722 BLS 65A V2 STACK combines a GEP-F722-HD V2 flight controller with a TAKER H65_8S_BLS 65A four-in-one ESC for UAV flight control and motor control. The controller uses an STM32F722 MCU and ICM42688-P IMU connected over SPI, with 16M onboard black box storage, five UARTs and an integrated LC filter. Integration features include Type-C USB, a direct DJI Air Unit connection, barometer support and BetaFlight OSD using an AT7456E chip.
The two boards share 30.5×30.5mm mounting spacing but require different footprints: 36.85×36.85mm for the controller and 42×45.7mm for the ESC. Silicone mounting inserts reduce the φ4mm holes to φ3mm. Electrical limits also differ: the controller accepts 3-6S LiPo, while the ESC accepts 3-8S Lipo and specifies 65A continuous current or 70A for five seconds. Stack, FC and ESC options are offered; the listed stack package supplies both boards, a capacitor, connection cables, screws, nuts and silicone pads as integration electronics rather than a complete flight platform.
Specifications
| Specification | Value & conditions |
|---|---|
| Product identity | GEPRC TAKER F722 BLS 65A V2 STACK |
| Configuration options | STACK, FC, ESC |
| Dual independent BECs | [email protected] and 5V@3A |
| FC model | GEP-F722-HD V2 Flight Controller |
| FC MCU | STM32F722 |
| FC IMU | ICM42688-P(SPI) |
| FC black box | 16M onboard |
| FC OSD | BetaFlight OSD w/ AT7456E chip |
| FC BEC | 5V@3A, [email protected] dual BEC |
| FC firmware target | GEPRCF722 |
| FC dimensions and mounting | 36.85×36.85mm; mounting hole spacing 30.5×30.5mm; φ4mm holes become φ3mm with silicone shock-absorbing circlesMounting holes become φ3mm when silicone shock-absorbing circles are used. |
| FC input voltage | 3-6S LiPo |
| FC UART count | 5 |
| FC weight | 8.1g |
| ESC model | TAKER H65_8S_BLS 65A 4IN1 ESC |
| ESC input voltage | 3-8S Lipo |
| ESC continuous current | 65A |
| ESC burst current | 70A (5 seconds)5-second burst. |
| ESC supported protocols | Dshot 150/300/600 |
| ESC dimensions and mounting | 42×45.7mm; mounting hole spacing 30.5×30.5mm; φ4mm holes become φ3mm with silicone shock-absorbing ringsMounting holes become φ3mm when silicone shock-absorbing rings are used. |
| ESC weight | 14.9g |
| ESC firmware target | B_X_30 |
| Air Unit connection | Direct plug-in to DJI Air Unit |
| USB interface | Type-C |
| Barometer support | Supported |
| FC power filter | Integrated LC filter |
| ESC ammeter support | Supported |
| Included equipment | 1 × FC board; 1 × ESC board; 1 × capacitor; 1 × DJI Air Unit adapter cable; 1 × flight controller adapter cable; 1 × XT60 power cable; 4 × M3*30 screws; 4 × M3*25 screws; 8 × nylon nuts; 8 × silicone anti-shake pads; 2 × sh1.0 4pin silicone cables; 1 × camera connection cableListed stack package. |
Request a quote for GEPRC TAKER F722 BLS 65A V2 STACK
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
