Product overview
The T-MOTOR MN605-S IP45 KV170 2PCS/SET supplies propulsion motor hardware for multirotor, VTOL and fixed-wing UAVs, with applications including aerial photography, cargo, tethered operation, mapping and inspection. Its Φ68.8*34.9mm motor uses a 24N28P configuration, 6mm internal and external shaft diameters, and imported 626ZZ bearings. Construction includes centrifugal cooling, an anti-rust-treated silicon-steel stator, heat-resistant copper wire and magnets, and IP45 protection. Each motor weighs 350g including cable and has a 14AWG*150mm lead.
The KV170 motor accepts 6-12S LiPo power and has recommended integration pairings of a FLAME 60A 12S ESC and 20-22-inch propellers. Peak current is 35A and maximum power is 1700W, both qualified for 180 seconds. Maximum thrust is 8.6kg, with an MTBF of about 1000 hours. The product designation specifies two pieces per set and a 980g package, while the packing list specifies one MN601 motor and one hardware pack; the supplied motor identity and quantity are inconsistent.
Specifications
| Specification | Value & conditions |
|---|---|
| Motor size | Φ68.8*34.9mm |
| Copper wire | 220℃ high temperature resistance: Level H |
| Configuration | 24N28P |
| Centrifugal cooling design | YES |
| Shaft diameter | IN: 6mm, OUT: 6mm |
| Rotor dynamic balance standard | ≤5Mg |
| Bearing | Imported 626ZZ |
| Motor dynamic balance standard | ≤10Mg |
| Magnet temperature resistance | 150℃ high temperature resistance |
| Ingress protection | IP45 |
| KV | 170 |
| Rated voltage | 6-12SLiPo battery. |
| Idle current | 1A20V. |
| Recommended ESC | FLAME 60A 12S |
| Peak current | 35A180s. |
| Recommended propeller size | 20-22" |
| Maximum power | 1700W180s. |
| Motor weight | 350gIncluding cable. |
| Internal resistance | 65mΩ |
| Package weight | 980g(2PCS/SET)2PCS/SET. |
| Maximum thrust | 8.6kg |
| MTBF | About 1000hours |
| Stator | Imported silicon steel sheet; anti-rust treatment; 180°C high-temperature-resistant coatings |
| Coil insulation test | 500V |
| Lead cable | 14AWG*150mm |
| Applications | Multirotor, VTOL and fixed-wing UAV propulsion; aerial photography, cargo drones, tethered applications, mapping and inspection |
| Supplied configuration | MN605-S IP45 KV170, 2PCS/SET |
| Packing-list contents | 1× T-MOTOR MN601 motor in the selected KV configuration and 1× hardware pack; this differs from the MN605-S KV170 2PCS/SET product designation |
Request a quote for T-MOTOR MN605-S IP45 KV170 2PCS/SET
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
