Product overview
The Foxeer F405 V2 (Plug) FC Reaper 55A ESC 8S Stack combines flight-control electronics with a four-channel motor controller for UAV integration. Its flight controller uses an STM32F405RGT6 processor, ICM42688-P gyro and DPS310 barometer, with Betaflight firmware, BF OSD and 16M flash recording memory. Six UART sets and connectors for DJI equipment, GPS/compass, two-camera switching and VTX provide peripheral integration points. Additional interfaces include three ADC inputs, one PWM channel, Smart Audio, a buzzer connection, a 2812 LED connection and Type-C USB.
Installation requires space for the 37X37mm, 8.4g flight controller and the 42.5x42x5.5mm, 14.6g ESC, both using a 30.5mm square mounting pattern. The controller accepts 4~8S LiPo power and supplies 5V/3A and 10V/3A BEC outputs; the ESC accepts DC 9V~36V (3-8S LiPo), has no BEC and specifies 55A*4 continuous and 80A*4 burst current. Both components have a -20°C to +55°C working range. The stack package supplies both boards, mounting hardware and camera, DJI, GPS/compass, FC-ESC, VTX and XT60 cables.
Specifications
| Specification | Value & conditions |
|---|---|
| Flight controller model | Foxeer F405 V2(Plug) Flight Controller |
| Flight controller processor and sensors |
|
| Flight controller power supply | 4~8S Lipo |
| Flight controller BEC output | DC5V/3A; 10V/3A |
| OSD and recording memory | OSD: BF OSD; black box: 16M Flash Memory |
| UART | 6 Set |
| Connectors | DJI; GPS/Compass; 2 Camera Switch; VTX |
| Flight controller ESC telemetry connection | RX1 |
| X8 support | Supported |
| ADC and PWM | ADC: X3; PWM: 1CH |
| Buzzer and Smart Audio | Buzzer: YES; Smart Audio: YES |
| LED | 1 Set 2812 LED |
| USB | Type-C |
| Flight controller firmware | FOXEERF405V2(BetaFlight) |
| Flight controller dimensions, mounting and weight |
|
| Flight controller working temperature | -20℃ ~ +55℃ |
| Flight controller working humidity | 20～95% |
| Flight controller storage temperature | -20℃ ~ +70℃ |
| ESC model and firmware | Foxeer Reaper 55A ESC; firmware: FOXEER_Reaper4IN1_F4_55A_128_Multi_32_9 |
| ESC continuous and burst current | Continuous: 55A*4; burst: 80A*4 |
| ESC input voltage | DC 9V~36V (3-8S Lipo) |
| ESC BEC | No |
| ESC telemetry | Supported |
| ESC programming | BLHeli32 |
| ESC current scaling | 70 |
| ESC input signals | DShot 150/ 300/ 600/ 1200 /MultiShot/ OneShot etc. |
| ESC operating and storage environment |
|
| ESC mounting holes | 30.5X30.5mm,Φ4mm/M3 |
| ESC dimensions and weight | Dimensions: 42.5x42x5.5mm; weight: 14.6g |
| Supplied configuration | 1 x FC; 1 x ESC; 8 x M3*8mm silicone grommets; 1 x capacity; 5 x M3 nylon nut; 1 x 120mm camera cable; 1 x 90mm DJI cable; 1 x 120mm GPS/Compass cable; 1 x FC-ESC cable; 1 x 90mm VTx cable; 1 x XT60 cableStack package. |
Request a quote for Foxeer F405 V2 (Plug) FC Reaper 55A ESC 8S Stack
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
