ChinaDrone.Request a quote ↗
COMPONENT

T-MOTOR AIR 20A 3-4S multirotor drone ESC

By T-MOTOR ↗

The T-MOTOR AIR 20A 3-4S is a FOC electronic speed controller for multirotor UAVs and F3P aircraft, supporting brushless motors, 3-4S LiPo batteries and signal frequencies up to 621Hz. It features pre-configured settings and twisted-pair signal wiring, and comes with a hardware kit.

Request a quote ↗
T-MOTOR AIR 20A 3-4S electronic speed controller with black casing and attached wires
T-MOTOR AIR 20A 3-4S electronic speed controller with black casing and attached wires
Manufacturer and modelT-MOTOR AIR 20A 3-4S ESC for multirotor drones
Product typeFOC electronic speed controllerThe description identifies an electronic speed controller.
Intended aircraft applicationsMultirotor UAVs and F3P aircraft
Battery support3-4S LiPo batteries
Signal frequencyUp to 621HzPublished maximum supported signal frequency.
Motor integrationBrushless motorsManufacturer describes optimized compatibility without specifying a universal motor compatibility envelope.

Product overview

The T-MOTOR AIR 20A 3-4S is a FOC electronic speed controller for brushless motors in multirotor UAVs and F3P aircraft. It supports 3-4S LiPo batteries and control signal frequencies up to 621Hz. Its control program is intended to improve throttle response and multirotor flight stability, while pre-configured settings simplify setup and support adaptive operation. A twisted-pair signal cable is designed to reduce crosstalk in the signal connection.

The package contains one T-MOTOR AIR 20A 3-4S ESC and one hardware kit. Matching guidance identifies the T-MOTOR MN3110 and MN3510 motors, while compatible propulsion kits include the T-MOTOR 355 DIY Drone Kit, 355 Quick-Release Drone Kit and AirGear 450II DIY Drone Power Kit for lightweight multirotor UAV applications.

Specifications

SpecificationValue & conditions
Manufacturer and modelT-MOTOR AIR 20A 3-4S ESC for multirotor drones
Product typeFOC electronic speed controllerThe description identifies an electronic speed controller.
Intended aircraft applicationsMultirotor UAVs and F3P aircraft
Battery support3-4S LiPo batteries
Signal frequencyUp to 621HzPublished maximum supported signal frequency.
Motor integrationBrushless motorsManufacturer describes optimized compatibility without specifying a universal motor compatibility envelope.
Supplied settingsPre-configured settings for setup and adaptive operationManufacturer describes settings as pre-configured.
Signal cable architectureTwisted-pair signal cableCrosstalk reduction is a manufacturer claim.
Control programControl program intended to enhance throttle response and multirotor flight stabilityManufacturer describes intended control benefits without supplying comparative measurements or test conditions.
Model and applicationAIR 20A 3-4S multirotor UAV ESCProduct identity and intended platform.
Signal frequency and battery support621Hz; 3-4S LiPoSupport specified for the AIR 20A 3-4S ESC.
Signal cableTwisted pairIntended to minimize crosstalk.
ModelT-MOTOR AIR 20A 3-4S
Device typeElectronic speed controller (ESC) for multirotor drones
Current20 A
Battery configuration3–4S
SOURCE WITH CHINADRONE

Request a quote for T-MOTOR AIR 20A 3-4S multirotor drone ESC

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
T-MOTOR FLAME 80A 12S V2.0 electronic speed controller with a black finned housing and attached wires.
Motors & ESCs

T-MOTOR FLAME 80A 12S V2.0 multirotor UAV ESC

By T-MOTOR

The T-MOTOR FLAME 80A 12S V2.0 is an industrial multirotor electronic speed controller supplied with a hardware kit. Published ratings specify 80A continuous current, 120A peak for 10 seconds, 6–12S LiPo support and a 600Hz refresh rate. Its sealed aluminum enclosure carries an IP56 rating, while installation dimensions are absent.

Motors & ESCs

LED Program Box 2A

By HOBBYWING

The HOBBYWING LED Program Box 2A programs PLATINUM series brushless ESCs for airplanes and helicopters. Part number 86020020 measures 88mm × 58mm × 14mm and weighs 40g. It accepts 4.8–6V input and requires an additional supply battery when the ESC has no built-in BEC.