ChinaDrone.Request a quote ↗
COMPONENT

T-MOTOR FLAME 80A 12S V2.0 multirotor UAV ESC

By T-MOTOR ↗

The T-MOTOR FLAME 80A 12S V2.0 is an industrial multirotor electronic speed controller supplied with a hardware kit. Published ratings specify 80A continuous current, 120A peak for 10 seconds, 6–12S LiPo support and a 600Hz refresh rate. Its sealed aluminum enclosure carries an IP56 rating, while installation dimensions are absent.

Request a quote ↗
T-MOTOR FLAME 80A 12S V2.0 electronic speed controller with a black finned housing and attached wires.
T-MOTOR FLAME 80A 12S V2.0 electronic speed controller with a black finned housing and attached wires.
Technical drawing of the T-MOTOR FLAME 80A 12S V2.0 ESC showing three views and dimensions.
Technical drawing of the T-MOTOR FLAME 80A 12S V2.0 ESC showing three views and dimensions.
Manufacturer and modelT-MOTOR FLAME 80A 12S V2.0 multirotor UAV ESC
Product purposeElectronic speed controller for industrial multirotor drones
Continuous current80AContinuous-current rating.
Peak current120A for 10sPeak-current rating applies for 10s.
Refresh rate600Hz
Battery support6–12S LiPoSpecified for LiPo batteries.

Product overview

The T-MOTOR FLAME 80A 12S V2.0 is an electronic speed controller for multirotor drone propulsion. It supports 6–12S LiPo batteries and has an 80A continuous-current rating, with a peak rating of 120A for 10 seconds. Its control features include a 600Hz refresh rate, a configurable throttle range and a microprocessor with a dedicated voltage regulator IC. The controller also supports firmware updates through USB and incorporates safeguards for start-up, overload, motor lock-up and throttle signal loss.

The controller combines a layered internal structure with a fully sealed, CNC-machined aluminum alloy enclosure rated IP56. The aluminum case forms part of its heat-dissipation design. It is compatible with U12 motors, while recommended motor matches are the U7 v2 KV490 and MN701-S IP45 KV280. The package contains one T-MOTOR FLAME 80A 12S ESC and one hardware kit.

Specifications

SpecificationValue & conditions
Manufacturer and modelT-MOTOR FLAME 80A 12S V2.0 multirotor UAV ESC
Product purposeElectronic speed controller for industrial multirotor drones
Continuous current80AContinuous-current rating.
Peak current120A for 10sPeak-current rating applies for 10s.
Refresh rate600Hz
Battery support6–12S LiPoSpecified for LiPo batteries.
Physical structureLayered structure
Circuit boardPCB with nano technology
EnclosureCNC-machined aluminum alloy enclosure
Heat dissipationMachined aluminum case described as providing efficient heat dissipationManufacturer description.
SealingFully sealed
Ingress protectionIP56
ProcessorHigh-performance microprocessor
Throttle adjustmentConfigurable throttle range
Processor voltage regulationSeparate voltage regulator IC for the microprocessor
Protection functionsStart-up, overload, motor lock-up and throttle signal loss safeguards
Firmware updatesUSB-supported firmware updatesUSB support is stated for firmware updates.
Motor compatibilityU12 motorsCompatibility; confirm the selected motor configuration.
Recommended motor matchesU7 v2 KV490 motor / MN701-S IP45 KV280 motorManufacturer matching-guide recommendations.
Supplied configuration1 × T-Motor FLAME 80A 12S ESC; 1 × hardware kitPublished packing list for the ESC product.
SOURCE WITH CHINADRONE

Request a quote for T-MOTOR FLAME 80A 12S V2.0 multirotor UAV ESC

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
FlashHobby D2826 fixed-wing motor with orange housing and silver shaft.
Motors & ESCs

FlashHobby D2826 Fixed Wing Motor

By FlashHobby

The FlashHobby D2826 Fixed Wing Motor is a compact, 50g brushless outrunner supplied with mounting accessories. Its configuration choices pair different maximum pull and power figures with specific propeller recommendations. Mechanical integration uses a 16 × 19mm mount, while electrical integration requires ESC-based PWM control and DC7.4–11.10V operation.

MAD 5015 IPE V3.0 320KV drone motor with mounting hardware and connectors
Motors & ESCs

5015 IPE V3.0 eVTOL Drone Motor

By MAD Components

The MAD 5015 IPE V3.0 eVTOL Drone Motor offers six KV options, 6S and 12S support, and 1.5~3.5kg sustained thrust. Its 270KV/320KV configurations suit 8-16kg eVTOLs; the 150KV configuration targets heavy quadcopters with 8-14kg takeoff weight. The 220-230g motor has defined motor and propeller mounting patterns.