Product overview
The STARTRC Drone Payload AirDropping System for DJI Flip (Gyro Version) is a payload release accessory for event deliveries, advertising and gifts. Its mounting arrangement uses upper and lower supports attached to the drone body, with the dropper fitted to an expansion bracket. A rope connects the payload to an iron ring held in the release hook. A top 1/4" threaded mount accommodates a lightweight camera, adding an attachment point for shooting alongside the dropping function. Compatibility is limited to DJI Flip.
The configuration combines a built-in battery with a rotation-triggered release mechanism. A full charge takes 1 hour and provides up to 400 uses. In N mode, the operator positions the drone and uses 10 seconds of horizontal rotation to release the item. Maximum payload is 100g, with under 90g recommended for optimal performance. Operation requires low speeds, gentle descent and a stable drone before release. Hook adjustment requires prior calibration and a stationary drone; exposed rope or ring can interfere with the bottom sensors.
Specifications
| Specification | Value & conditions |
|---|---|
| Product identity | STARTRC Drone Payload AirDropping System for DJI Flip (Gyro Version) |
| Product type | Drone-mounted payload release accessory for remotely controlled item drops. |
| Drone compatibility | Designed exclusively for DJI Flip; incompatible with other drone models. |
| Maximum payload | Up to 100g. |
| Recommended payload | Under 90g.For optimal performance. |
| Battery charging and use count | Built-in battery fully charges in 1 hour and provides up to 400 uses.Built-in battery; up to 400 uses following a full charge. |
| Camera integration mount | Top 1/4" thread mount supports lightweight camera attachment for shooting and payload dropping.For attaching lightweight cameras. |
| Mounting architecture | Top and bottom supports secure to the drone body, with the dropper mounted on an expansion bracket. |
| Release operation | Payload releases after 10 seconds of horizontal rotation; operation calls for N mode.N mode; at the desired drop location. |
| Calibration control and indication | Short-press the power button to calibrate; flashing green indicates calibration and solid green indicates success.During system calibration. |
| Hook adjustment | Hold the power button for 3 seconds to adjust hook rotation; release to stop.After calibration, with the drone stationary. |
| Stationary adjustment requirement | Calibrate before adjusting the hook and keep the drone stationary throughout adjustment.During hook adjustments. |
| Shutdown control | Hold the power button for 2 seconds to shut down. |
| Payload attachment | A rope connects the item to an iron ring seated in the release hook; keep the line straight.With an item attached for dropping. |
| Flight handling | Fly at low speeds and descend gently to avoid instability.When dropping items. |
| Drop stability requirement | Stabilize the drone before initiating a drop.Before releasing a payload. |
| Bottom sensor clearance | Excessively exposed rope or iron ring may interfere with the drone’s bottom sensors.With the rope and iron ring installed. |
| Initial charging requirement | Fully charge the device.Before first use. |
| Charging indicator | Red light remains on during charging and turns off when fully charged.During charging. |
Ask for the STARTRC Drone Payload AirDropping System for DJI Flip (Gyro Version) price ↑
