Product overview
The STARTRC Aluminum Gimbal Bumper Guards for Avata 360 form a two-piece protective accessory around the camera assembly. Dedicated left and right guards use a curved, raised structure to help keep the gimbal and lenses clear of direct contact during minor bumps, side rollovers and hard landings. The aluminum-alloy parts have an anodized finish and mount directly to the drone frame with screws. Their shape follows the camera structure without pressing against either the lens or the gimbal.
The guards are designed to stay below the lens field of view in panoramic and single-lens modes. The original gimbal protector remains removable and installable with the guards fitted. Storage compatibility extends to selected STARTRC hard cases and molded PU cases with suitable clearance; third-party and close-fitting cases are not guaranteed to fit. Product dimensions are 60.6 × 38.9 × 6.8 mm. Each guard weighs approximately 3.4 g, with the pair adding approximately 6.8 g, excluding installation screws if absent from the stated net weight.
The supplied accessory set contains one left guard, one right guard, four long screws, four short screws and one screwdriver, packaged within dimensions of 108 × 81.5 × 17 mm. Screw placement and length must follow the included installation guide because an incorrect length could damage the drone. After fitting, rotate the camera through its available range and check footage before flight. The added takeoff weight may slightly affect handling or flight time, with no exact endurance change specified.
Specifications
| Specification | Value & conditions |
|---|---|
| Product | STARTRC Aluminum Gimbal Bumper Guards for Avata 360 |
| SKU | 12040004 |
| Compatibility | Avata 360 |
| Main function | Raised protection around the gimbal and lenses to help reduce direct contact.Minor bumps, side rollovers and hard landings. |
| Configuration | Left Guard + Right Guard |
| Material | Aluminum Alloy |
| Surface treatment | Anodized Finish |
| Installation | Screw-mounted directly to the drone frame.Using the included screws. |
| Camera mode compatibility | Curved guards designed to remain below the lens field of view.Panoramic and single-lens shooting modes. |
| Camera clearance | Dedicated left and right guards follow the camera structure without pressing against the lens or gimbal. |
| Gimbal protector compatibility | Supports installation and removal of the original gimbal protector.With the guards attached. |
| Carrying case compatibility | The guards can remain fitted in compatible cases; compatibility with third-party or close-fitting cases is not guaranteed.Selected STARTRC hard cases and molded PU cases designed with clearance for the guards. |
| Product dimensions | 60.6 × 38.9 × 6.8 mm |
| Package dimensions | 108 × 81.5 × 17 mm |
| Weight | Approximately 3.4 gPer guard. |
| Added weight | Approximately 6.8 gPair of guards; excluding installation screws if those are not included in the stated net weight. |
| Package contents | Left Guard × 1, Right Guard × 1, Long Screws × 4, Short Screws × 4, Screwdriver × 1 |
| Flight impact | Added takeoff weight may slightly affect flight time or handling.With the guards installed. |
| Screw length limitation | Mounting points may require different screw lengths; using the wrong length could damage the drone.At the corresponding mounting points, following the included installation guide. |
| Camera clearance check | Rotate the camera through its available range and check the footage.After installation and before flying. |
Ask for the STARTRC Aluminum Gimbal Bumper Guards for Avata 360 price ↑
