Product overview
The GEPRC GEP-CT30 Frame is an airframe kit for building a three-inch cinematic FPV aircraft. Its architecture combines a 3.0mm main plate, 1.5mm bottom plate and 2.0mm isolation plate with a one-piece injection-molded propeller guard. The camera bracket and fuselage columns use 7075-T aluminum alloy, while the molded components use PC +PET. A camera damping structure is intended to reduce high-frequency jitter and jello. Removing six screws separates the top plate and propeller guard for access when replacing components.
Integration provisions include a 127mm motor-to-motor dimension, 19mm FPV camera spacing and 25.5mm x 25.5mm flight controller mounting holes. Video transmitter mounting patterns are specified as 20mm x 20mm /25.5 x 25.5. The 12mm x 12mm motor mounts accommodate 15-18-20 series motors, with three-inch propellers specified for the build. The frame supports a variety of action cameras, but installing a DJI O3 Air unit requires separately purchased aluminum lens mounting parts. Its 103.2g weight includes the guard, printed parts, Naked GP8 camera base mount and antenna tube.
Buyers can select the frame-only configuration or the version with a COB light strip and BEC; the optional ring-shaped strip fits within the propeller guard. Supplied hardware includes the three plates, screws, printed parts, guard and Naked GP camera base mount. Battery retention equipment comprises two non-slip mats and M15*200 and M15*220 straps, alongside two 100mm receiver antenna tubes. Naked GP camera power cables with 4S and 6S balance heads and 1.5mm and 2.0mm L-shaped screwdrivers complete the principal installation accessories.
Specifications
| Specification | Value & conditions |
|---|---|
| Manufacturer | GEPRC |
| Model | GEP-CT30 |
| Product type and purpose | Frame for cinematic FPV builds |
| Configuration options | With COB light strip and BEC, Frame only |
| Motor to motor | 127mm |
| Isolation plate thickness | 2.0mm |
| Main plate thickness | 3.0mm |
| Bottom plate thickness | 1.5mm |
| Flight controller mounting holes | 25.5mm x 25.5mm |
| Video transmitter mounting holes | 20mm x 20mm /25.5 x 25.5 |
| Motor mounting holes | 12mm x 12mm |
| FPV camera spacing | 19mm |
| Suitable propeller size | 3 inch propeller |
| Weight | 103.2gIncluding propeller guard, 3D printed parts, Naked GP8 camera base mount and antenna tube. |
| Camera bracket and fuselage columns | 7075-T aluminum alloy |
| Propeller guard construction | One-piece injection-molded propeller guard |
| Injection molding materials | PC +PET |
| Top plate and guard disassembly | Remove 6 screws to separate the top plate and propeller guard |
| Camera vibration management | Gimbal shock absorption structure intended to reduce high-frequency jitter and jello; supports a variety of action cameras |
| Motor integration | 15-18-20 series motorsWith 12mm x 12mm motor mounting holes. |
| Additional camera mounting requirement | Corresponding aluminum lens mounting parts must be purchased separatelyFor installation of the DJI O3 Air unit. |
| Lighting arrangement | Ring-shaped COB light strip embedded in the propeller guardLight strip option selected. |
| Included structural parts | 1 main plate, 1 bottom plate, 1 isolation plate and 1 set of screws |
| Optional electronics | 1 BEC module and 1 COB light stripOptional equipment. |
| Included printed parts, guard and camera mount | 1 set of 3D printed parts, 1 three-inch one-piece injection-molded propeller guard and 1 Naked GP camera base mount |
| Included battery retention and antenna hardware | 2 battery non-slip mats; 2 receiver antenna tubes, 100mm; 1 battery strap M15*200; 1 battery strap M15*220 |
| Included power cables | 1 cable with 4S balance head and 1 cable with 6S balance headNaked GP camera power connections. |
| Included tools | 1 L-shaped screwdriver, 1.5mm; 1 L-shaped screwdriver, 2.0mm |
| Included accessories and packaging | 1 carbon fiber keychain, 2 GEPRC stickers, 1 service card and 1 packaging box |
Request a quote for GEPRC GEP-CT30 Frame
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
