Product overview
The X-CROSS HV2-80A is a propulsion component, not a flight platform or an airframe kit. It is a brushless motor electronic speed controller (ESC) for multirotor aircraft. It accepts 5S to 12S lithium batteries, a range suited to X-Class drones. It is rated at 80A continuous current, with a 10-second burst figure of 100; no unit is given for the burst figure. It has no BEC. The ESC weighs 25.5g and measures 55x28x10mm. Its small size and light weight make it suitable for drones with fairly narrow arms.
The controller has an ARM 32-bit Cortex core MCU running at up to 48MHz and uses BLHeli-32 firmware, listed as BLHeliSuite32 firmware. When powered on, it detects the throttle signal type automatically. It supports standard PWM (1-2ms), Oneshot125 (125-250us), Oneshot42 (41.7-83.3us), Multshot (5-25us) and all DShot digital signals. Damped light regenerative braking makes the motor slow down faster when the throttle is reduced. The power stage uses high-performance, low-ESR MOSFETs. Twisted silicone signal wires help reduce interference on the signal line, and an aluminum alloy heatsink helps slow temperature rise.
Specifications
| Specification | Value & conditions |
|---|---|
| Product type | Brushless motor electronic speed controller (5-12S) |
| Supported voltage | 5-12S |
| Maximum battery | Up to 12S lithium battery; suited to X-Class dronesLithium battery |
| Continuous current | 80A |
| Burst current | 100 (unit not stated)10-second burst |
| BEC | No |
| Weight | 25.5g |
| Dimensions | 55x28x10mm |
| Firmware | BLHeliSuite32 firmware |
| Typical application | Multirotor |
| MCU | ARM 32-bit Cortex core MCU, up to 48MHz |
| Throttle signal detection | Automatic throttle signal detection at power-upAt power-up |
| Throttle protocols | PWM (1-2ms), Oneshot125 (125-250us), Oneshot42 (41.7-83.3us), Multshot (5-25us); all DShot digital signals |
| Braking | Damped light regenerative braking |
| MOSFETs | High-performance, low-ESR MOSFETs |
| Signal wire | Twisted silicone signal wire |
| Cooling | Aluminum alloy heatsink to slow temperature rise |
| Form factor | Small and light; suited to drones with narrower arms |
Request a quote for X-CROSS HV2-80A
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
