Product overview
The Rctimer TS-4060BB is a servo actuator with FET analog drive and a carbon-brush motor. Its mechanical construction combines plastic gearing, a wear-resistant case and double ball bearings. The unit weighs 40 g and measures 40.8 × 20.1 × 38.0mm, defining the body space needed for installation. Its connector wire is specified as 180cm long. This configuration is a servo component rather than a flight platform or airframe kit.
Electrical integration requires a supply within the specified 4.8V ~ 6.0V operating range. At 4.8V, idle current is 200mA, operating speed is 0.16 sec/60 and stall torque exceeds 6.3 kg-cm. At 6V, the corresponding figures are 250mA, 0.19 sec/60 and 7kg-cm. These voltage-specific figures distinguish the two operating points: the higher-voltage rating provides greater stall torque while carrying a longer stated movement time and higher idle current.
Specifications
| Specification | Value & conditions |
|---|---|
| Manufacturer and model | Rctimer TS-4060BB |
| Operating voltage | 4.8V ~ 6.0V |
| Idle current | 200mAAt 4.8V. |
| Idle current | 250mAAt 6V. |
| Operating speed | 0.16 sec/60At 4.8V. |
| Operating speed | 0.19 sec/60At 6V. |
| Stall torque | Greater than 6.3 kg-cmAt 4.8V. |
| Stall torque | 7kg-cmAt 6V. |
| Weight | 40 g |
| Dimensions | 40.8 × 20.1 × 38.0mm |
| Connector wire length | 180cm |
| Drive | FET analog |
| Gearing | Plastic gear |
| Case | Wear-resistant case |
| Bearing arrangement | Double ball bearing |
| Motor | Carbon-brush motor |
