Product overview
The Mugin GF260 V-tail Fixed-wing Servo and Propulsion Kit groups hardware for fixed-wing UAV assembly and maintenance. Its reference configuration combines a DLE40 pusher engine and 19 × 10 wooden pusher propeller with two aileron servos, two ruddervator servos, a throttle servo and a steering servo. Navigation lights and a pitot tube complete the listed equipment. Actual supplied items take precedence over this reference list. Components ship in their original manufacturer packaging, leaving professional assembly and aircraft integration to the buyer.
The package is matched and tested with the Mugin GF260 V-tail Airframe Kit; the airframe version must be specified when ordering. The airframe, flight controller, fuel hardware, ignition battery and regulation, brake servo, GNSS and communication equipment are excluded, as is a wiring harness as standard. Wiring and connector preparation are available by arrangement. Integration includes propulsion mounting, fuel-system work and electrical power distribution. Older or modified aircraft may require different mounting or wiring. Payload capacity and endurance depend on the completed aircraft and operating conditions.
Specifications
| Specification | Value & conditions |
|---|---|
| Product identity and purpose | Mugin GF260 V-tail Fixed-wing Servo and Propulsion Kit; component package for UAV manufacturers, system integrators and maintenance teams |
| Airframe matching | Matched and tested with the Mugin GF260 V-tail Airframe KitSpecify the airframe version when ordering. |
| Aileron servos | Savox SC-1256TG; quantity 2Component list is for reference only; actual supplied items take precedence. |
| Ruddervator servos | Savox SC-1256TG; quantity 2Component list is for reference only; actual supplied items take precedence. |
| Throttle servo | Savox SV-1250MG; quantity 1Component list is for reference only; actual supplied items take precedence. |
| Steering servo | Savox SC-1256TG; quantity 1Component list is for reference only; actual supplied items take precedence. |
| Pusher engine | DLE40; quantity 1Component list is for reference only; actual supplied items take precedence. |
| Pusher propeller | 19 × 10 wooden pusher propeller; quantity 1Component list is for reference only; actual supplied items take precedence. |
| Navigation lights | Navigation light set; quantity 1 setComponent list is for reference only; actual supplied items take precedence. |
| Pitot tube | MUGINUAV Pitot Tube; quantity 1Component list is for reference only; actual supplied items take precedence. |
| Shipping carton | Shipping carton; quantity 1Component list is for reference only; actual supplied items take precedence. |
| Supplied configuration qualification | Component list is for reference only; actual supplied items take precedence |
| Airframe | Not included |
| Flight controller | Not included |
| Wiring harness | Not included as standardStandard configuration. |
| Fuel system hardware | Not included |
| Ignition battery and regulation | Not included |
| Brake servo | Not included |
| GNSS and communication equipment | Outside the kit’s scope |
| Component packaging | Original manufacturer packaging |
| Avionics and wiring integration | Avionics and system integration remain with the buyer; wiring and connector preparation available by arrangementBy arrangement. |
| Flight controller compatibility | Compatible with Pixhawk and CubePilot flight controllersFlight controller purchased separately; configure for the aircraft and complete calibration, failsafe setup and flight testing after installation. |
| Installation scope | Propulsion mounting, fuel-system integration and electrical power distribution |
| Setup requirements | Set servo travel and control direction, configure the flight controller, commission the engine and complete ground checksBefore flight testing. |
| Mounting and wiring limitations | Different mounting or wiring arrangements may be neededOlder or modified aircraft. |
| Payload capacity and endurance | Depend on the completed aircraft and operating conditionsCompleted aircraft and operating conditions. |
Request a quote for Mugin GF260 V-tail Fixed-wing Servo and Propulsion Kit
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
