ChinaDrone.Request a quote ↗
COMPONENT

BeeRotor 210 Replacement Carbon Fiber Arm (2pcs/bag)

By RCTimer ↗

The RCTimer BeeRotor 210 Replacement Carbon Fiber Arm (2pcs/bag), identified as BR210-Arm, supplies carbon fiber replacement arms for the BeeRotor 210. Each bag contains two arms, making this a replacement component package for the aircraft.

Get a free sourcing quote for BeeRotor 210 Replacement Carbon Fiber Arm (2pcs/bag)

Get a free quote

ManufacturerRCTimer
Product modelBeeRotor 210 Replacement Carbon Fiber Arm (2pcs/bag)
Product identifierBR210-Arm
Component type and materialReplacement carbon fiber arm for the BeeRotor 210
Package quantity2 pieces per bag

Product overview

The RCTimer BeeRotor 210 Replacement Carbon Fiber Arm (2pcs/bag) is a replacement arm component for the BeeRotor 210. The arm uses carbon fiber, and the product identifier is BR210-Arm.

The supplied configuration is a bag containing two replacement arms. Procurement is therefore for an arm replacement package, rather than a complete flight platform or an airframe kit.

Specifications

SpecificationValue & conditions
ManufacturerRCTimer
Product modelBeeRotor 210 Replacement Carbon Fiber Arm (2pcs/bag)
Product identifierBR210-Arm
Component type and materialReplacement carbon fiber arm for the BeeRotor 210
Package quantity2 pieces per bag

Ask for the BeeRotor 210 Replacement Carbon Fiber Arm (2pcs/bag) price ↑

Related guides

More frames & airframes from Chinese manufacturers →
CYS-S0008 analog servo with a translucent blue housing and white output shaft
Component

CYS-S0008 Servo

CYS

The cysmodel CYS-S0008 is an 8g analog plastic-gear servo for FPV fixed-wing applications. It has a coreless motor, no bearings and a 20T output spline. Specifications include PWM control, a 4.8-6.0V operating supply, a 180mm lead and 90° total angular travel.

View details
GEPRC GEP-PT Frame with black plates, metal standoffs and red-tipped antenna tubes
Component

GEP-PT Frame

By GEPRC

The GEPRC GEP-PT Frame is a compact airframe kit with a 125 mm wheelbase and support for propellers up to 2.5inch. Its plate-and-standoff structure comes with assembly hardware, an XT30 power cord, battery retention accessories, cushioning items and an antenna fixing tube.

View details
DYS D800-V6 hexacopter airframe with six propellers and landing gear
Component

D800-V6 Motor

By DYS

The DYS D800-V6 is a heavy-lift UAV platform with an 800 mm wheelbase, quick-disconnect construction and retractable landing gear. Its configuration specifies motors, ESCs and carbon-fiber propellers, with 6S LiPo power. Take-off weight ranges from 4–10 kg; the 20-minute hovering figure applies at 7 kg with a 15000 mAh battery.

View details
AXR 8832 MG-D standard servo with black housing, green label and metal output shaft
Component

SV TECH AXR 8832 MG-D Servo

By Zhuhai SV Tech Co., Ltd.

The Zhuhai SV Tech Co., Ltd. AXR 8832 MG-D is a standard PWM servo for RC steering, control surfaces and mechanisms. It combines an iron-core motor, stainless steel gears and two bearings in a 60 g package. Operation spans 4.8–8.4 V, with separate stall and rated torque limits governing load selection.

View details
EMAX ES9055II servo with silver and red housing, output shaft and attached cable
Component

ES9055II High Voltage Magnetic Encoder Servo

By EMAX

The EMAX ES9055II High Voltage Magnetic Encoder Servo is an all-metal, brushed digital actuator for demanding aircraft controls and mechanical assemblies. It combines contactless position feedback, a JR connector and a 23T spline with 6.0–8.4V operation. Voltage-dependent stall torque reaches 35 kgf·cm, and positional control supports 180° or full-range 360° configurations.

View details
KEEP EXPLORING

Similar products

Browse all products ↗
Propellers & airframes

Kpower HB1200T 1200Kg High Torque Brushless Servo

Kpower

The Kpower HB1200T 1200Kg High Torque Brushless is a high-torque servo for large-scale drones and medical equipment. It combines an aluminum-alloy case, steel gearing and magnetic position sensing, with PWM control and a 24-32V supply range. Listed performance includes 1200kg·cm stall torque and 0.25sec/60° no-load speed.

View product →Enquire ↗
GEPRC GEP-Vapor-D O4 Pro Frame with carbon-fiber arms and orange side panels
Propellers & airframes

GEP-Vapor-D O4 Pro Frame

By GEPRC

The GEPRC GEP-Vapor-D O4 Pro Frame is a carbon-fiber airframe kit designed for DJI O4 Air Unit Pro aerial filming builds. Vapor-D5 and Vapor-D6 configurations recommend 5-inch and 6-inch propellers respectively. Both feature a DC layout, aluminum camera mounts, vibration-damping silicone, camera protection and multiple electronics mounting patterns.

View product →Enquire ↗
Gemfan GF04-200BP-RED/BLUE drone soccer frame with a blue spherical protective cage
Propellers & airframes

Gemfan GF04-200BP-RED/BLUE Drone Frame

Gemfan

The GEMFAN GF04-200BP-RED/BLUE is a 200 mm drone soccer frame for competition and training builds. Weighing 42 g assembled without electronics, it combines a carbon fiber propeller guard, integrated adjustable LEDs, quick-release motor mounts and a detachable battery holder around a centered propeller plane.

View product →Enquire ↗