ChinaDrone.Request a quote ↗
COMPONENT

RadioLink TS100 v2.0

By RadioLink ↗

The RadioLink TS100 v2.0 is an M10N GPS navigation module for UAV flight-controller integration, combining four-system satellite reception with an electronic compass. Ceramic antennas, two-stage filtering and a low-noise amplifier support weak-signal reception and interference suppression. The supplied package contains one module and a packing bag.

Request a quote ↗
RadioLink TS100 v2.0 GPS module with cable and connector
RadioLink TS100 v2.0 GPS module with cable and connector
Product identityRadioLink TS100 v2.0 M10N GPS module
Out-of-band interference filteringTwo-stage filtering with 78db attenuation
In-band interference handlingHigh-linearity LNA with an in-band input 1dB compression point of -3dBm
Reception frequencies1561±1MHz, 1575±1MHz, 1602–1610MHz
Satellite systemsBD1, GPS/L1, Galileo/E1 and GLONASS/G1; simultaneous quad-system operation
Positioning accuracy50 centimeters

Product overview

The RadioLink TS100 v2.0 combines an Ublox M10050 GPS decoder, ceramic chip antennas and a built-in IST8310 electronic compass with an I2C interface. Its receiver architecture pairs a low-loss circuit ahead of the low-noise amplifier with two-stage Murata surface acoustic wave filtering. The filtering provides 78db attenuation for out-of-band interference, while the amplifier has an in-band input 1dB compression point of -3dBm. This arrangement addresses interference associated with equipment such as UAV image transmitters and nearby high-voltage lines.

Integration requires a 5±5%VDC supply, with current specified at 50-100mA and a baud rate of 38.4K. The module defaults to NMEA, automatically selects the connected flight controller’s protocol and returns to NMEA after disconnection. Simultaneous reception covers four satellite systems; the six-second acquisition figure for 20 satellites applies at open ground. With RadioLink Mini Pix, it supports practice using Super Simple Modes. The supplied configuration comprises one TS100 v2.0 M10N module and a packing bag, making this a navigation component for integration into a UAV.

Specifications

SpecificationValue & conditions
Product identityRadioLink TS100 v2.0 M10N GPS module
Out-of-band interference filteringTwo-stage filtering with 78db attenuation
In-band interference handlingHigh-linearity LNA with an in-band input 1dB compression point of -3dBm
Reception frequencies1561±1MHz, 1575±1MHz, 1602–1610MHz
Satellite systemsBD1, GPS/L1, Galileo/E1 and GLONASS/G1; simultaneous quad-system operation
Positioning accuracy50 centimeters
Satellite acquisition20 satellites in 6 secondsAt open ground.
Station keepingStation-keeping capabilityAt the valley bottom.
Default protocolNMEADefault operation and after disconnection from the flight controller.
Automatic protocol selectionRecognizes the flight-controller type and automatically selects its protocolWhen connected to a flight controller.
Baud rate38.4K
Supply voltage5±5%VDC
Current50-100mA
GPS decoder chipUblox M10050
Electronic compassBuilt-in IST8310 electronic compass with I2C port
Antenna2.5dbI high-gain, selective ceramic chip antennas
Filter hardwareTwo-stage Murata SAWF surface acoustic wave filter
Receiver circuit architectureLow-loss pre-LNA circuit matched to the ceramic chip antennas
SupercapacitorsSupercapacitors incorporated
Super Simple ModesSupports practice using Super Simple ModesUsed with the RadioLink Mini Pix flight controller.
Supplied configurationOne TS100 v2.0 (M10N) module and one packing bag
SOURCE WITH CHINADRONE

Request a quote for RadioLink TS100 v2.0

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
NM871B navigation positioning module with a silver metal cover and printed model marking
Flight control & navigation

NM871B

By Changsha Jinwei Integrated Circuit Co., Ltd

Changsha Jinwei Integrated Circuit Co., Ltd’s NM871B is a compact GNSS and inertial navigation module for embedded positioning, including UAV integration. It combines the NEMO baseband/RF chip with built-in inertial navigation, supports multiple satellite constellations and precision positioning modes, and provides serial interfaces within a 17mm × 22mm × 2.8mm package.

Flight control & navigation

SE100(M10N)

By RadioLink Electronic Limited

The RadioLink SE100(M10N) is a UAV satellite-positioning module with an integrated IST8310 electronic compass, three-band reception and simultaneous support for four satellite systems. Its hardware combines a ceramic antenna with two-stage interference filtering. Supplied with a mounting bracket, it provides GPS and I2C connections and requires 5 VDC ±5%.

GEPRC TAKER F722 45A 32Bit AIO flight controller and ESC board with USB-C port
Flight control & navigation

GEPRC TAKER F722 45A 32Bit AIO

By GEPRC

The GEPRC TAKER F722 45A 32Bit AIO is a compact UAV flight-controller and ESC assembly supplied with wiring, a capacitor and damping hardware. It combines an STM32F722 processor, SPI IMU, barometer, five full UARTs and a dedicated HD video transmitter connection in a 9.2g board supporting 2–6S LiPo input.

Flight control & navigation

BW-IMU525C

By BWSENSING

The BWSENSING BW-IMU525C is a CAN inertial measurement unit for unmanned aircraft, robotics and other vehicle applications. It combines gyroscope and three-axis acceleration sensing in a 60 × 59 × 29 mm package, with sampling up to 500 Hz, dynamic and orthogonality compensation, and a temperature-compensated range of -40 °C to +85 °C.