Product overview
The GEPRC TAKER F722 45A 32Bit AIO combines flight control and ESC functions in an electronics assembly for UAV integration. Its STM32F722 processor works with an ICM 42688-P IMU connected over SPI, while a built-in barometer adds another onboard sensor. Firmware provisions include the GEPRC_F722_AIO target and INAV compatibility. Betaflight OSD uses an AT7456E chip, with OSD tuning, buzzer and LED support providing additional setup and aircraft integration functions. Blackbox storage is specified as 16Mb of onboard flash.
The board measures 35mm × 33.5mm and weighs 9.2g, with a 25.5mm × 25.5mm mounting pattern and M3 damping provisions for M2 screws. Five full UART ports provide connections for external devices. A dedicated bottom-mounted 6-pin connector supports direct plug-in HD video transmitters, reducing soldering during installation. Type-C USB and a 5V@1A BEC output complete the listed interfaces. Power input is 2–6S LiPo, and the ESC supports Dshot600, Oneshot and Multishot with a 45A continuous current rating.
The supplied configuration is a flight-controller electronics package rather than a complete aircraft or airframe kit. It contains one TAKER F722 45A AIO FC, one 7cm XT30-18AWG wire, one 35V 220μF capacitor, one SH1.0-6Pin to GH1.25-8Pin adapter cable and one SH1.0-6Pin cable. Eight black M2×6.5mm flight-controller damping balls are also included. These supplied power, connection and mounting components accompany the board; the package contents do not include a flight platform.
Specifications
| Specification | Value & conditions |
|---|---|
| Model | GEPRC TAKER F722 45A 32Bit AIO |
| MCU | STM32F722 |
| IMU | ICM 42688-P (SPI) |
| Firmware target | GEPRC_F722_AIO |
| Blackbox | 16Mb on-board flash memory |
| OSD | Betaflight OSD with AT7456E chip |
| UART connections | R1 T1 / R2 T2 / R3 T3 / R4 T4 / R5 T5 |
| Buzzer support | Yes |
| LED support | Yes |
| USB | Type-C USB |
| BEC output | 5V@1A |
| ESC | 32Bit 45A |
| Continuous current | 45A |
| Burst current specification | 55A(10A) |
| Timed burst current | 55A10s burst. |
| Input voltage | 2~6S (LIPO)LiPo battery input. |
| ESC protocols | Dshot600, Oneshot, Multishot |
| Dimensions | 35mm * 33.5mm |
| Mounting hole size | 25.5 mm * 25.5mm φM3 damping to M2 screw |
| Weight | 9.2g |
| Barometer and INAV compatibility | Built-in barometer; compatible with INAV firmware |
| HD video transmitter integration | Direct plug-in connection for HD VTXsHD VTX connection through the dedicated bottom 6-pin port. |
| Full UART port count | 5 |
| Supplied configuration | 1× TAKER F722 45A AIO FC; 1× XT30-18AWG wire-7cm; 1× 35V 220μF capacitor; 1× SH1.0-6Pin to GH1.25-8Pin adapter cable; 1× SH1.0-6Pin cable; 8× M2×6.5mm FC dampening balls (black) |
Request a quote for GEPRC TAKER F722 45A 32Bit AIO
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
