Product overview
The RadioLink RC6GS V3 is a seven-channel surface radio controller for RC cars, boats, lifebuoys and tracked robots. The transmitter has a throttle trigger, grip and switches, paired with a separate R7FG receiver incorporating a gyro and high-voltage servo support. Ground control distance with R7FG is 600m. Dual programmable mixing permits coordinated operation of two channels, while crawler assignments cover rudder, throttle, transfer case, gear shifting, front locker, rear control and capstan. It stores parameters for up to 30 models and offers crawler cruise control, switch-operated dual rates and a lap timer.
The DSC port supports simulators, selectable two- or three-axis FPV head tracking, or TBS Crossfire integration. FPV goggles can control camera movement on an RC car, and the display-holder interface is specified as M6 thread (1/4 thread). Telemetry provides RSSI and receiver voltage after binding; model battery voltage additionally requires wiring to the ESC and battery. The supplied R7FG supports model battery telemetry up to 8S (33.6V), while R8FGH or R16F permits up to 14S (58.8V). IPX4 splash protection applies to R7FG versions V1.2, V1.3 and V1.4.
Transmitter power options are six AA batteries, 2S-4S LiPo or an 18650 lithium battery. The 18650 option requires a JST connector, with specified battery-case dimensions of 89*59*25mm (3.5” *2.32” *0.98”). Reverse polarity protection accompanies the JST power connection. USB connects to a computer for firmware upgrades only and must not be used for charging. The listed package contains one transmitter, one R7FG receiver, an EXT connection cable, lanyard, manual and box; actual contents depend on the purchased configuration.
Specifications
| Specification | Value & conditions |
|---|---|
| Product type and applications | RadioLink RC6GS V3 seven-channel remote controller for cars, boats, lifebuoys and tracked robots. |
| Ground control distance | 600m.With R7FG receiver. |
| Radio architecture | FHSS spread spectrum with 67 channels and pseudo-random frequency hopping. |
| Processor architecture | ARM M4 transmitter processor and industrial 32-bit ARM Cortex M0 receiver processor. |
| Model memory | Stores parameters for a maximum of 30 models. |
| Receiver identification | Arbitrary ID assignment among a maximum of 10 bound receivers. |
| Programmable mixing | Dual programmable mix control with arbitrary two-channel mixing. |
| Crawler channel assignments |
|
| Cruise control | Cruise control allows a crawler throttle setting.For RC crawlers. |
| Dual-rate operation | Assignable switch or button for dual-rate operation. |
| Telemetry measurements | RSSI, receiver voltage and model battery voltage.RSSI and receiver voltage appear after binding; model battery voltage requires connecting the wire to the ESC and battery. |
| Maximum battery voltage telemetry | Maximum 14S (58.8V).Bound with R8FGH or R16F; model battery voltage requires connecting the wire to the ESC and battery. |
| Battery voltage telemetry with standard receiver | Maximum 8S (33.6V).Bound with R7FG or R8FG; model battery voltage requires connecting the wire to the ESC and battery. |
| DSC port functions | Selectable simulator, FPV head tracking or TBS Crossfire function; supported simulators include VRC Pro, CarX and Assetto Corsa Competizione; head tracking offers 3-axis or 2-axis selection. |
| Timer | Timer for lap and complete-track results. |
| Receiver configuration | Seven-channel receiver with integrated gyro, high-voltage servo support and model voltage telemetry.Standard R7FG receiver. |
| Gyro sensitivity adjustment | Adjustable through STD or CH3.R7FG receiver; CH3 is controlled by the VR switch by default. |
| Receiver splash protection | IPX4 water-splash protection.R7FG versions V1.2, V1.3 and V1.4. |
| FPV display mounting interface | M6 thread (1/4 thread). |
| Transmitter battery options | 6 AA batteries, 2S-4S LiPo or 18650 lithium battery.For 18650 lithium power, a JST connector is required and the specified battery-case dimensions are 89*59*25mm (3.5” *2.32” *0.98”). |
| 18650 battery connection and compartment | JST connector required; battery-case dimensions 89*59*25mm (3.5” *2.32” *0.98”).When powering RC6GS V3 with an 18650 lithium battery. |
| Reverse polarity protection | JST power connector with reverse polarity protection. |
| USB function and limitation | Computer-based firmware updates through USB; USB is for upgrading only and must not be used for charging. |
| Compatible receivers | R4FGM (4 channels); R6FG and R6F (6 channels); R8FG, R8EF and R8FGH (8 channels); R12F (12 channels); R16F (16 channels), in addition to standard R7FG. |
| Listed supplied configuration | One RC6GS V3 transmitter, one R7FG receiver, one EXT connection cable for R7FG, one lanyard, one user manual and one packing box.Packing contents depend on the purchased configuration. |
Request a quote for RadioLink RC6GS V3
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
