Product overview
The RadioLink RC6GS V3 provides seven-channel radio control for cars, boats, lifebuoys and tracked robots. Its transmitter has a throttle trigger, grip and switches, with memory for up to 30 model configurations. Dual programmable mixing allows two channels to be combined, while crawler assignments accommodate throttle, transfer-case operation, gear shifting, front-locker control and a capstan. The R7FG receiver incorporates a gyro and supports high-voltage servos. Ground control distance with R7FG is 600m; control range depends on the receiver fitted.
The listed configuration contains one transmitter, R7FG receiver, EXT connection cable, lanyard, manual and box; actual contents depend on the purchased package and require checking its listing or confirmation with the seller. R7FG battery telemetry supports a maximum of 8S (33.6V), with model-voltage measurement requiring wiring to the ESC and battery. R8FGH or R16F raises that telemetry limit to 14S (58.8V). R7FG versions V1.2, V1.3 and V1.4 provide IPX4 splash protection, and gyro sensitivity is adjustable through STD or CH3.
The DSC port supports simulator operation, selectable two- or three-axis FPV head tracking, or TBS Crossfire integration. FPV goggles can direct camera movement on an RC car, and a display-holder mounting interface is provided. Transmitter power options are six AA batteries, a 2S-4S LiPo or an 18650 lithium battery. The 18650 option requires a JST connector and an 89 × 59 × 25mm battery case (3.5 × 2.32 × 0.98 inches). USB connects to a computer for firmware upgrades only and must not be used for charging.
Specifications
| Specification | Value & conditions |
|---|---|
| Product purpose | RadioLink RC6GS V3 seven-channel controller for cars, boats, lifebuoys and tracked robots. |
| Control range | 600m ground control distance with R7FG; range varies with receiver.R7FG receiver; ground distance. |
| Radio transmission | FHSS spread spectrum, 67 channels and pseudo-random frequency hopping. |
| Processor architecture | ARM M4 transmitter processor and industrial 32-bit ARM Cortex M0 receiver processor. |
| Model memory | Parameter storage for a maximum of 30 models. |
| Receiver identification | Assignable IDs among a maximum of 10 bound receivers. |
| Dual-rate control | Assignable switch or button for operating D/R while driving. |
| Programmable mixing | Dual programmable mixing with any two channels selectable for mix control. |
| Crawler channel assignments |
|
| Cruise control | Cruise control allows the crawler throttle level to be set.RC crawler configuration. |
| DSC integration | Selectable simulator, FPV head-tracking or TBS Crossfire function. Supports VRC Pro, CarX and Assetto Corsa Competizione; selectable 3-axis or 2-axis head tracking. |
| FPV camera control | FPV goggles control the RC car camera's up, down, left and right movement.FPV goggles used with an RC car. |
| Extended control distance | More than 600 meters with TBS Crossfire.TBS Crossfire connected to the DSC port. |
| Timer | Timer for lap and complete-track results. |
| Telemetry measurements | RSSI, receiver voltage and model battery voltage.RSSI and receiver voltage display after binding; model voltage requires a wire connection to the ESC and battery. |
| Higher-voltage battery telemetry | Maximum 14S (58.8V) battery telemetry.Bound with R8FGH or R16F. |
| Battery telemetry with standard receiver | Maximum 8S (33.6V) battery telemetry.Bound with R7FG or R8FG. |
| Receiver configuration | Seven-channel receiver with integrated gyro, high-voltage servo support and model voltage telemetry.R7FG receiver. |
| Gyro adjustment | Sensitivity adjustable through STD or CH3, with VR switch control by default.R7FG receiver. |
| Receiver splash protection | IPX4 water splash protection.R7FG versions V1.2, V1.3 and V1.4. |
| Protective coating | Nano-coating treatment on the PCB and pins.R7FG receiver. |
| Transmitter power options | 6 AA batteries, 2S-4S LiPo or an 18650 lithium battery.The 18650 lithium option requires a JST connector and battery-case dimensions of 89*59*25mm (3.5” *2.32” *0.98”). |
| Reverse-polarity protection | JST connector and RadioLink voltage-protection software provide reverse-polarity protection. |
| FPV display mounting interface | M6 thread (1/4 thread). |
| Firmware updates and USB limitation | USB firmware updates through a computer; USB is for upgrading only and must not be used for charging.USB connection to a computer. |
| Receiver compatibility | R7FG (standard), R16F, R12F, R8FGH, R8FG, R8EF, R6FG, R6F and R4FGM. |
| Listed package contents | 1 RC6GS V3 transmitter, 1 R7FG receiver, 1 EXT connection cable for R7FG, 1 lanyard, 1 user manual and 1 packing box.Actual package contents depend on the purchased configuration and require checking its sales listing or confirmation with the seller. |
Request a quote for RadioLink RC6GS V3
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
