ChinaDrone.Request a quote ↗
COMPONENT

Maytech MT160A-SBEC-FP32 Falcon Pro 32bit

By Maytech ↗

The Maytech MT160A-SBEC-FP32 Falcon Pro 32bit is a brushless ESC for RC airplane and helicopter integration. It combines a 32-bit MCU and Maytech FP firmware with 160A continuous and 185A burst ratings, a 5.5V/5A BEC and support for 2-6-cell LiPo batteries. Its specified size is 50*31mm, with an 85g net weight.

Request a quote ↗
Maytech MT160A-SBEC-FP32 Falcon Pro 32bit brushless ESC with black casing and attached wires
Maytech MT160A-SBEC-FP32 Falcon Pro 32bit brushless ESC with black casing and attached wires
Manufacturer and modelMaytech MT160A-SBEC-FP32 Falcon Pro 32bit brushless ESC
ApplicationsAirplane/RC Airplane/3D flying/RC Hobby Applications/sport flying/aggressive aerobatics/helicopter/racing airplane/ROV/ROVEEE/remote operated vehicle, underwater robot, Underwater Robotics/underwater remotely operated vehicles, subsea robots, cablecam, broadcast, IBC2019, Ultra drones, etc.
Named flight modelSBAC 55" M081
Processor32-bit MCU
FirmwareMaytech FP series firmware
Continuous current160A

Product overview

The Maytech MT160A-SBEC-FP32 Falcon Pro 32bit is a brushless electronic speed controller intended especially for RC airplanes, with helicopter, aerobatic, racing and other remote-operated applications also listed. Its control architecture combines a 32-bit MCU, Maytech FP series firmware and a separate MCU voltage-regulator IC for interference resistance. Throttle characteristics include linear response, quick response and low-speed operation. The controller is a propulsion-control component for integration into a model, rather than a complete flight platform or an airframe kit.

The ESC has a specified size of 50*31mm and a net weight of 85g, defining its stated installation footprint and mass contribution. Electrical integration uses a 2-6-cell LiPo battery range, a 160A continuous-current rating, a 185A burst-current rating and a 5.5V/5A BEC. Programming is available through Trx or an optional Maytech programming card. Low-voltage, blocked-rotation and signal-loss protections accompany startup inhibition at battery connection; motor direction can be changed through the card or by exchanging two of the three ESC wires.

Specifications

SpecificationValue & conditions
Manufacturer and modelMaytech MT160A-SBEC-FP32 Falcon Pro 32bit brushless ESC
ApplicationsAirplane/RC Airplane/3D flying/RC Hobby Applications/sport flying/aggressive aerobatics/helicopter/racing airplane/ROV/ROVEEE/remote operated vehicle, underwater robot, Underwater Robotics/underwater remotely operated vehicles, subsea robots, cablecam, broadcast, IBC2019, Ultra drones, etc.
Named flight modelSBAC 55" M081
Processor32-bit MCU
FirmwareMaytech FP series firmware
Continuous current160A
Burst current185A
BEC5.5V/5A
Battery cell count2-6 cellsLiPo battery.
Net weight85g
Size50*31mm
MCU power regulationSeparate voltage regulator IC for the MCU, with interference resistance.
Throttle and low-speed characteristicsStartup performance, linear throttle response, quick throttle response and low-speed performance.
Protection functionsLow-voltage, blocked-rotation and signal-loss protection.
ProgrammingProgrammable by Trx or a Maytech programming card.Maytech programming card is optional.
Safe startupMotor startup is inhibited at battery connection.When the battery is connected, regardless of throttle-stick position.
Motor rotation directionMotor rotation direction can be changed.By exchanging two of the three ESC wires or using the programming card.
SOURCE WITH CHINADRONE

Request a quote for Maytech MT160A-SBEC-FP32 Falcon Pro 32bit

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
Motors & ESCs

LED Program Box 2A

By HOBBYWING

The HOBBYWING LED Program Box 2A programs PLATINUM series brushless ESCs for airplanes and helicopters. Part number 86020020 measures 88mm × 58mm × 14mm and weighs 40g. It accepts 4.8–6V input and requires an additional supply battery when the ESC has no built-in BEC.

HOBBYWING XRotor Pro H100A 14S FOC electronic speed controller with black finned housing and attached wires.
Motors & ESCs

HOBBYWING XRotor Pro H100A 14S FOC

By HOBBYWING

The HOBBYWING XRotor Pro H100A 14S FOC is a drone propulsion ESC with CAN communication, isolated throttle input and an aluminum alloy housing. It accepts 12–14S power at 44–63V and carries a 40A continuous rating with good heat dissipation. Optional propeller positioning requires a custom motor and motor-specific programming.