ChinaDrone.Request a quote ↗
COMPONENT

T-MOTOR 505-X Integrated UAV Propulsion System KV320/KV380

By T-MOTOR ↗

The T-MOTOR 505-X KV320/KV380 is an integrated propulsion arm for industrial multirotor UAVs, combining an MN505-S brushless motor with an Alpha 60A FOC ESC. It uses 6S LiPo power and accommodates 25mm or 30mm arm tubes through adapter ring switching. Recommended folding propellers are optional and sold separately.

Request a quote ↗
T-MOTOR 505-X integrated UAV propulsion unit with black housing and silver end plates, without propeller
T-MOTOR 505-X integrated UAV propulsion unit with black housing and silver end plates, without propeller
Product modelsT-MOTOR 505-X KV320 / KV380
System typeIntegrated multirotor UAV propulsion system
Arm setMN505-S brushless motor + Alpha 60A FOC ESC
Exposed wire length650mm
Arm size122.6*69*67.9mm
Boom weight398g505-X KV320; including wire.

Product overview

The T-MOTOR 505-X is a modular propulsion assembly for industrial multirotor UAV integration. It combines an MN505-S brushless motor and an Alpha 60A FOC ESC within a propulsion arm, with KV320 and KV380 versions and CW or CCW rotation choices. The arm measures 122.6*69*67.9mm and provides 650mm of exposed wire. Adapter ring switching accommodates 30mm and 25mm arm tubes. A built-in LED supports visibility during low-light operation, while the ESC uses sine-wave FOC motor control.

Both versions use a 6S LiPo supply, with different weights, electrical ratings and recommended propellers. The KV320 weighs 398g including wire, draws 2.5A at idle at 24V, and has ratings of 55A peak current for 180s and 1200W maximum power for 180S. The KV380 weighs 387g including wire, draws 3.6A at idle at 24V, and has corresponding ratings of 50A and 963W for those durations. The recommended folding propellers are MF2211 for KV320 and MF1806 for KV380; these propellers are optional and sold separately.

Specifications

SpecificationValue & conditions
Product modelsT-MOTOR 505-X KV320 / KV380
System typeIntegrated multirotor UAV propulsion system
Arm setMN505-S brushless motor + Alpha 60A FOC ESC
Exposed wire length650mm
Arm size122.6*69*67.9mm
Boom weight398g505-X KV320; including wire.
Boom weight387g505-X KV380; including wire.
Motor configuration24N28P
Shaft diameterIN:6mm OUT:4mm
Idle current2.5A505-X KV320; 24V.
Idle current3.6A505-X KV380; 24V.
Rated voltage6SLiPo battery.
Internal resistance38mΩ505-X KV320.
Internal resistance28mΩ505-X KV380.
IP rating entry/
Peak current55A505-X KV320; 180s.
Peak current50A505-X KV380; 180s.
ESCALPHA 60A 6S
Maximum power1200W505-X KV320; 180S.
Maximum power963W505-X KV380; 180S.
Recommended propellerMF2211505-X KV320.
Recommended propellerMF1806505-X KV380.
Propeller configurationMF2211 / MF1806 folding propellerOptional; sold separately.
Compatible tube sizes30mm and 25mmVia adapter ring switching.
Rotation direction optionsCW / CCW
Integrated lightingBuilt-in LED light
Arm assemblyMN505-S brushless motor + Alpha 60A FOC ESC
Arm dimensions122.6*69*67.9mm
ESC control architectureFOC (sine wave)
SOURCE WITH CHINADRONE

Request a quote for T-MOTOR 505-X Integrated UAV Propulsion System KV320/KV380

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
DYS MB30030 speed controller with blue casing and attached wires.
Motors & ESCs

DYS MB30030 speed controller

By DYS

The DYS MB30030 is a multicopter electronic speed controller supplied with updated SimonK firmware, a separate power-stage heat sink and a 5V, 2A BEC. It supports 30A continuous output and 40A bursts lasting up to 10 seconds, with DC 6–16.8V input specified for 2–5S Lixx batteries.