Product overview
The MAD M20 MiNi IPE Drone Motor is a propulsion component for heavy-payload multirotors and industrial UAVs with substantial thrust requirements. Its MAD M20 MiNi IPE V1.0 configuration supports 12S power and is optimized for 28–40 inch carbon fiber propellers. Available winding choices are 90KV, 100KV, 110KV and 160KV. Rated thrust is 8–9.5 kgf, with peak thrust up to 30.4 kgf per axis; these figures distinguish the intended sustained operating range from the peak output.
The 812g motor has dimensions of D:108.6 × 45.9 mm, providing a concrete envelope for propulsion installation. Mechanical interfaces include D:50 M4×4 motor mounting holes and two propeller mounting patterns, D:20 M3×4 and D:24 M4×4. Its architecture incorporates 21 pole pairs, an anticorrosive stator, two 6902ZZ bearings and centrifugal heat dissipation. Integration also needs to accommodate 150 mm extended enameled wires. Protection is rated IP35, while the wire and magnet temperature ratings are 220°C and 180°C respectively.
Specifications
| Specification | Value & conditions |
|---|---|
| Motor model | MAD M20 MiNi IPE V1.0 |
| Sustained thrust | 8~9.5kg |
| Maximum thrust | 30.4kg |
| Supported voltage | 12S |
| Weight | 812g |
| Number of pole pairs | 21 |
| Stator | Anticorrosive |
| Varnished wire temperature rating | 220°C |
| Motor dimensions | D:108.6 × 45.9 mm |
| Magnet temperature rating | 180°C |
| Degree of protection | IP35 |
| Cable length | 150 mmExtended enameled wires. |
| Centrifugal heat dissipation | YES |
| Rotor balance | ≤10 mg |
| Propeller mounting holes | D:20 M3×4, D:24 M4×4 |
| Motor balance | ≤20 mg |
| Shaft diameter | IN: 15 mm |
| Motor mounting holes | D:50 M4×4 |
| Bearings | 6902ZZ*2 |
| Disruptive test | 500 V |
| KV options | 90KV, 100KV, 110KV, 160KV |
| Optimized propeller size | 28–40 inchCarbon fiber propellers. |
| Peak and rated thrust | Peak: up to 30.4 kgf; rated: 8–9.5 kgfPer axis. |
| Intended application | Heavy-payload multirotor drones using large propellers |
Request a quote for M20 MiNi IPE Drone Motor
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
