Product overview
The MAD 5010 EEE V2.0 brushless drone motor provides propulsion for aircraft carrying cameras, gimbals, agricultural spraying equipment, sensors or delivery payloads. The motor weighs 162g and measures D:56 × 32.7 mm, with a reinforced alloy housing and precision bearings. Available winding choices are 110KV, 200KV, 240KV, 310KV and 370KV. Electrical support covers 6S, 8S and 12S configurations, while the carbon fiber propeller range extends from 16 to 24 inches. These choices give integrators several motor and propeller combinations to accommodate their aircraft design.
Mechanical integration uses D:25 M3×4 or D:30 M3×4 motor mounting holes and D:12 M3×2 or D:18 M3×2 propeller mounting holes. The motor has a 5 mm internal shaft diameter and a 150 mm black silicone cable. Sustained thrust is 1.5~2kg; continuous thrust is also specified as 1300–2500g per motor, with 5200g peak burst thrust per rotor. Rain protection and independent centrifugal heat dissipation accompany the construction. Intermittent operation near maximum thrust requires adequate cooling, and the frame must be rigid enough to handle 24-inch propellers and motor vibrations.
Specifications
| Specification | Value & conditions |
|---|---|
| Motor model | MAD 5010 EEE V2.0 |
| Sustained thrust | 1.5~2kg |
| Maximum thrust | 5.2kg |
| Supported voltage configurations | 6S; 8S; 12S |
| Motor weight | 162g |
| KV options | 110KV 200KV 240KV 310KV 370KV |
| Continuous thrust | 1300–2500g per motor; intended for stable, efficient operationPer motor. |
| Peak burst thrust | 5200g per rotor; for critical maneuvers or emergency recoveryPer rotor; burst operation. |
| Propeller range and selection | 16–24"; 24" propellers for maximum heavy-lifting efficiency; 16" propellers for agile response in high-speed applicationsCarbon fiber propellers. |
| Number of pole pairs | 14 |
| Stator wire | Anticorrosive varnished wire; 180°C |
| Motor dimensions | D:56 × 32.7 mm |
| Magnet temperature rating | 150°C |
| Protection | Rain protection |
| Motor cable | 150 mm; 16# AWG; black silicone |
| Heat dissipation | Independent centrifugal heat dissipation |
| Rotor balance | ≤5 mg |
| Propeller mounting holes | D:12 M3×2, D:18 M3×2 |
| Motor balance | ≤10 mg |
| Shaft diameter | IN: 5 mm |
| Motor mounting holes | D:25 M3×4, D:30 M3×4 |
| Bearings | 685ZZ*1 / 695ZZ*1 |
| Disruptive test voltage | 500 V |
| Construction | Precision bearings and reinforced alloy housing |
| Cooling requirement | Ensure adequate cooling, such as airflow or heat sinksIntermittent operation near maximum thrust. |
| Intended applications | Cinematography with cameras or gimbals; agricultural spraying or sensor payloads; delivery drones |
| Package lifting guidance | Packages up to ~8–10kgDelivery drone; depending on frame and battery weight. |
| Quadcopter thrust and weight guidance | Total maximum thrust: 20,800g; target total weight ≤10,400g at 2:1 for agility or ≤14,560g at 1.43:1 for heavy liftQuadcopter with four motors at 5200g maximum thrust each; total drone weight includes payload. |
| ESC sizing guidance | Likely requires 40–60A ESCsExact current draw at maximum thrust must be checked for ESC selection. |
| Frame rigidity requirement | Ensure frame rigidity to handle 24" propellers and motor vibrationsFrame integration with 24" propellers. |
Request a quote for 5010 EEE V2.0 brushless drone motor
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
