ChinaDrone.Request a quote ↗
COMPONENT

Ladasky LDK-DC01

By Shenzhen Ladasky Technology Co., LTD. ↗

The Ladasky LDK-DC01 integrates passive RF drone detection, protocol-based positioning and trajectory tracking in a portable carrying case. A built-in display and dual batteries support 6–7 hours of monitoring. Its receiver covers 100 MHz–6 GHz, with identification and distance capabilities dependent on compatible target signals and operating conditions.

Ladasky LDK-DC01 portable drone detector in an open carrying case with display and antennas
Ladasky LDK-DC01 portable drone detector in an open carrying case with display and antennas
BrandLadasky
ModelLDK-DC01
Product categoryPortable Drone Detectors
Detection methodPassive RF reception and protocol parsing
Detection transmissionPassive reception; no active radio transmission for detection
Frequency range100 MHz–6 GHz

Product overview

The Ladasky LDK-DC01 is a portable drone monitoring system built into a carrying case, combining passive RF reception, protocol processing, a display and dual lithium batteries. It identifies compatible drones and supports single-station positioning and trajectory tracking through CRPC, Drone ID and RID parsing. Detection receives signals without active radio transmission across 100 MHz–6 GHz. Available information depends on target protocol, signal conditions and monitoring environment. Persistent allowlists and blocklists survive power cycles; allowlisted targets remain detectable without triggering alarms.

The case measures 470 × 357 × 176 mm closed and 470 × 472 × 690 mm open, both L × W × H with ±5 mm tolerance. Weight is 14.4 kg including two lithium batteries. The integrated 13.3-inch, 1920 × 1080 TFT LCD enables monitoring without a separate display; interfaces include touch screen, network port, USB and Type-C. Each battery provides 28.8 V / 9 Ah, or 259.2 Wh, with 6–7 hours of dual-battery operation. The adapter accepts AC 110–240 V, and detection-mode consumption is 71 W under normal operating conditions.

Distance specifications are 0–5 km for CRPC with DJI Mavic 3 Pro, RID with DJI Mini 5 Pro, and Drone ID with either model. Non-standard CRPC specifies 0–1.5 km at 433 MHz using a 1 W data transmission module, and 0–3 km at 915 MHz using a 2 W Black Sheep data transmission module. These distances require a good electromagnetic environment without obvious obstructions and depend on target and site. IP66 applies with the lid closed. Adapter-powered temperatures are −40°C to +65°C under specified storage/start-up operating conditions; battery-powered temperatures are −25°C to +55°C for specified start-up operation after temperature storage.

Specifications

SpecificationValue & conditions
BrandLadasky
ModelLDK-DC01
Product categoryPortable Drone Detectors
Detection methodPassive RF reception and protocol parsing
Detection transmissionPassive reception; no active radio transmission for detection
Frequency range100 MHz–6 GHz
Key frequency bands433 MHz, 900 MHz, 1.4 GHz, 2.4 GHz, 5.2 GHz, 5.8 GHz
CRPC detection and analysis0–5 km; test target: DJI Mavic 3 ProTest target: DJI Mavic 3 Pro.
RID parsing distance0–5 km; test target: DJI Mini 5 ProTest target: DJI Mini 5 Pro.
Drone ID parsing distance0–5 km; test targets: DJI Mini 5 Pro / DJI Mavic 3 ProTest targets: DJI Mini 5 Pro / DJI Mavic 3 Pro.
Non-standard CRPC at 433 MHz0–1.5 km; test target: 1 W data transmission moduleTest target: 1 W data transmission module.
Non-standard CRPC at 915 MHz0–3 km; test target: 2 W Black Sheep data transmission moduleTest target: 2 W Black Sheep data transmission module.
Distance test conditionsGood electromagnetic environment with no obvious obstructions; performance depends on target and siteGood electromagnetic environment with no obvious obstructions; performance depends on target and site.
Positioning methodProtocol parsing and positioning
Supported parsingCRPC, Drone ID, RID
Display13.3-inch TFT LCD; 1920 × 1080 resolution
Battery capacity2 × 28.8 V / 9 Ah; 259.2 Wh per batteryTwo batteries; 259.2 Wh per battery.
Battery operating time6–7 hours with dual batteriesWith dual batteries.
Power supplyLithium batteries; adapter input AC 110–240 V
Operating power consumption71 W in detection mode under normal operating conditionsIn detection mode under normal operating conditions.
Closed dimensions470 × 357 × 176 mm (L × W × H; ±5 mm)Case closed; L × W × H; ±5 mm.
Open dimensions470 × 472 × 690 mm (L × W × H; ±5 mm)Case open; L × W × H; ±5 mm.
Equipment weight14.4 kg, including two lithium batteriesIncluding two lithium batteries.
Adapter-powered temperature range−40°C to +65°C; specified storage/start-up operating conditionsAdapter-powered; specified storage/start-up operating conditions.
Battery-powered temperature range−25°C to +55°C; specified start-up operation after temperature storageBattery-powered; specified start-up operation after temperature storage.
Protection ratingIP66 with lid closedWith lid closed.
User interfacesTouch screen, network port, USB, Type-C
Target listsPersistent allowlist and blocklist; no alarms for allowlisted targetsAllowlisted targets do not trigger alarms.

Ask for the Ladasky LDK-DC01 price ↑

KEEP EXPLORING

Similar products

Browse all products ↗
Benewake TFmini-i LiDAR ranging module with black enclosure and cable.
Cameras & sensors

Benewake TFmini-i

By Benewake

The Benewake TFmini-i is an enclosed industrial-grade LiDAR ranging module for short-distance sensing. Its 50 mm × 34 mm × 41 mm body weighs 52 g and provides IP65 protection. RS-485 and CAN interfaces support integration, with a stated operating range of 0.1 ~ 12 m.

Cameras & sensors

Holybro AS1318C Digital Airspeed Sensor

By Holybro

The Holybro AS1318C Airspeed Sensor provides airspeed readings through Ardupilot and PX4 configuration workflows. Setup requires a software-specific parameter setting and restart. Calibration is required for accurate readings, while complete Ardupilot configuration and calibration are available only in the fixed-wing airframe configuration.