The KST CM12 is a servo from KST Meizhou Company Limited, classified in the manufacturer's Clubman servo range. Its procurement identification consists of the KST brand, the CM12 model designation and the Clubman servo product class.
The KST CM12 is a servo manufactured by KST Meizhou Company Limited. CM12 is the model designation for this component.
The CM12 belongs to the manufacturer's Clubman servo product class. Its procurement identity combines the KST manufacturer name, CM12 model designation and Clubman servo classification.
| Specification | Value & conditions |
|---|---|
| Manufacturer | KST Meizhou Company Limited |
| Model | KST CM12 |
| Product class | Clubman servo |
The MAD 2216 V1.0 920KV drone motor is supplied without a propeller. It measures D:27.8 × 33 mm and has seven pole pairs, an anti-rust-treated stator and two MR84ZZ bearings. Mechanical interfaces include separate motor and propeller mounting patterns, with a 200mm cable and connection accessories.
The T-MOTOR U15XL KV38 is a BLDC propulsion motor for heavy-lift UAVs and manned aircraft. It offers up to 81kg thrust and 3550W rated power, with a 24S LiPo rating. The motor weighs 4408g including cable and has a Φ151.5*96mm envelope.
The HOBBYWING C6225, specified as C6225-200KV, is a propulsion motor for fixed-wing and VTOL UAV integration. Its published dimensions, mounting patterns and cable lengths support installation assessment. Recommended combination: a propeller, ESC and battery combination without establishing bundle contents, and qualifies thrust, maximum current and laboratory load data by configuration and measurement conditions.
The Kitefly DJI M400 Paddle Blade Protective Cover from Nanjing Airfly Electronic Technology Co., Ltd. is a propeller protection accessory for high-altitude cleaning. It combines lightweight collision protection with waterproof and corrosion-resistant characteristics, high-pressure water suitability, and straightforward installation and removal.
The SkyRC 20A ESC is a compact quadcopter electronic speed controller supplied with BLHeli firmware. It supports 2–4-cell Li-xx batteries, 20A continuous current and a 25A burst for 10 seconds. Its 22×12 mm dimensions and 1.86 g weight exclude cables; control features include OneShot125 and configurable braking.
The Scorpion HKIII-5025-440KV is a 440KV motor component weighing 566 Grams (19.96 oz), with a 12-arm stator and 10 magnet poles. It supports a maximum 12s LiPo configuration and specifies continuous limits of 95 Amps and 4200 Watts, with higher peak ratings limited to 5 seconds.
The EMAX CF2822 1200KV is a brushless motor with a listed 2822 stator size and a single 1200KV option. Its intended uses include general propulsion, 28XX replacement and multicopter builds, with additional roles in FPV performance tuning, legacy propulsion and engineering prototype support.
The Scorpion HKII-2208-34 is a 39-gram brushless motor primarily intended for helicopter and ducted-fan propulsion. It combines a 2600 RPM / Volt winding with a maximum 3s LiPo configuration and 160 Watts continuous power. Supplied connectors and mounting hardware support integration; propeller use requires a separately purchased shaft adapter.
The SIYI E6 Propulsion System has a package containing one propulsion unit and one outer box. A separate E6 folding propeller package contains one propeller, an A0 hook and loop retention strap, four M3*8 mm socket head cap screws and one outer box.