ChinaDrone.Request a quote ↗
COMPONENT

Kpower P0043 4.3G Plastic Gear Coreless Micro Servo

By Kpower ↗

The Kpower P0043 is a 4.3g plastic-gear coreless micro servo for compact RC, drone, robot and smart home mechanisms. It combines POM gearing, potentiometer feedback and a standard three-wire JR interface with PWM control. Its 3.7-6V operating range, adjustable 120° default travel and compact housing define its integration requirements.

Product identity and purposeKpower P0043 4.3G Plastic Gear Coreless Micro Servo for RC, robot, drone and smart home actuation.
Stall torque1 kgf·cmAt 6.0V.
No-load speed0.06 s/60°At 6.0V; no load.
Travel angle120°; adjustable.Default angle; customization supported.
Voltage range3.7-6V
Dimensions20x8.4x19.8mm

Product overview

The Kpower P0043 is a miniature servo for RC, robot, drone and smart home actuation. Its physical architecture combines a plastic housing, self-lubricating POM gears, a coreless motor and potentiometer position sensing. At 20x8.4x19.8mm and 4.3g (0.15oz), it provides a compact component for integration into small mechanisms. The body is described as an 8mm flat design, while the output connection uses a 20T Φ3.45 spline. The motor is specified as a 3.3W high-speed hollow cup unit.

The standard control arrangement uses a three-wire JR remote control interface and PWM signaling, with programmable electronic protection and soft start/stop. Supply voltage is 3.7-6V, and default travel is 120°, with angle adjustment and customization supported. At 6.0V, stall torque is 1 kgf·cm, no-load speed is 0.06 s/60°, and stall current is 800 mA; these figures describe different operating conditions. The servo carries an IP42 rating and a -10–50°C operating temperature range, with customization also supported for the signal protocol and ingress protection specification.

Specifications

SpecificationValue & conditions
Product identity and purposeKpower P0043 4.3G Plastic Gear Coreless Micro Servo for RC, robot, drone and smart home actuation.
Stall torque1 kgf·cmAt 6.0V.
No-load speed0.06 s/60°At 6.0V; no load.
Travel angle120°; adjustable.Default angle; customization supported.
Voltage range3.7-6V
Dimensions20x8.4x19.8mm
Weight4.3g (0.15oz)
Stall current800 mAAt 6.0V; stalled.
Case materialPlastics
Gear materialSelf-lubricating POM plastic gears.
Output spline20T Φ3.45
Motor typeCoreless motor.
Bearing entry/
Position sensorPotentiometer
Signal and protocolPWMCustomization supported.
Ingress protection ratingIP42Customization supported.
Operating temperature-10–50°C
Body design8mm flat design.
Motor power3.3W high-speed hollow cup motor.
Control interfaceStandard three-wire JR remote control interface.
Electronic functionsProgrammable electronic protection and soft start/stop.

Ask for the Kpower P0043 4.3G Plastic Gear Coreless Micro Servo price ↑

KEEP EXPLORING

Similar products

Browse all products ↗
Scorpion HK-4526 Shaft Kit XL (6mm 55mm) with metal shaft, retaining rings and screws in retail packaging
Motors & ESCs

HK-4526 Shaft Kit XL (6mm 55mm)

By Scorpion

The Scorpion HK-4526 Shaft Kit XL (6mm 55mm) is a factory replacement for HK-4526 helicopter motor shafts. Its extended hardened steel shaft measures 116mm long, with an 8mm main diameter and a 6mm pinion end. Shaft removal requires a press and support for the motor’s front housing.