Product overview
The Kimpok KP-T33A10 is a wireless FPV video transmitter for UAV integration, operating across 3170MHz–3470MHz with 16 channels and IRC Tramp control. Its hardware combines an aluminum alloy enclosure, heat sink and fan, with an SMA female antenna socket and a 1.0 6P power connector. The transmitter measures 65.8mm × 37.3mm × 19.3mm and weighs 48.15g. Mounting uses a 20mm × 20mm hole pattern with 2mm holes, providing concrete dimensions for allocating installation space and attachment points within a UAV.
Local operation uses separate band/channel and power buttons, supported by red, blue and green status LEDs. The detailed electrical specification gives DC 15V–36V and 4–8S battery input, while an additional rating gives 7–36V DC and 2–8S. Power specifications list a 10W maximum with five adjustment levels, but the button instructions describe four levels ending at 7W. These conflicting ratings leave the input limits and selectable power configuration unresolved. Thermal protection progressively reduces output above 100°C, potentially to 25mW, and restores the selected power when temperature falls to 95°C.
Specifications
| Specification | Value & conditions |
|---|---|
| Manufacturer | Kimpok |
| Model | KP-T33A10 |
| Place of origin | China |
| Certification | CE certification |
| Product type | Wireless video transmitter |
| Frequency and channel count | 3.3GHz; 3170MHz–3470MHz; 16 channels |
| Maximum RF power and specified adjustment levels | 10W maximum; adjustable levels of 1W, 2.5W, 5W, 7.5W and 10W |
| RF power range | 10W; 25mW–10000mW |
| Detailed input voltage and battery support | DC 15V–36V; 4–8S battery input |
| Additional power supply rating | 7–36V DC; 2–8S |
| Antenna connector | SMA female socket with an inner-hole contact |
| Control protocol | IRC Tramp |
| Enclosure and cooling | Aluminum alloy shell, heat sink and fan |
| Mounting hole spacing and diameter | 20mm × 20mm spacing; ø2mm holes |
| Dimensions | 65.8mm × 37.3mm × 19.3mm |
| Weight | 48.15g |
| Status indicators | Red channel LED; blue band LED; green power LED |
| Local controls | Band/channel selection button and separate power adjustment button |
| Power connector | 1.0 6P power connector |
| Channel selection | Cycles through eight channel positions; red LED flash count identifies the positionShort press of button ④. |
| Frequency band selection | Switches between frequency groups A and B, with blue LED indicationHold button ④ for 5 seconds. |
| Power levels in button-control instructions | Cycles through 1W, 2W, 5W and 7WShort press of button ⑤. |
| Power indicator flash counts |
|
| Pit mode | Enters pit mode; green LED remains illuminatedHold the power adjustment button for 3 seconds. |
| Thermal power reduction | Reduces transmission power one level at a time, down to 25mWTransmitter temperature exceeds 100°C and remains above that threshold. |
| Thermal power recovery | Returns to the originally selected transmission powerTransmitter temperature drops to 95°C following thermal power reduction. |
