ChinaDrone.Request a quote ↗
COMPONENTKimpok

Kimpok 1.2G 4.5W

Company: Shenzhen Kimpok Technology Co., Ltd ↗

The Kimpok 1.2G 4.5W is a compact analog FPV video transmitter for drone integration. It offers 16 channels across 1080 ~ 1360 MHz, selectable power up to 4.5W, and IRC parameter control. An integrated aluminum heat sink, cooling fan and temperature protection support its thermal management.

Get a free sourcing quote for Kimpok 1.2G 4.5W

Kimpok 1.2G 4.5W FPV video transmitter with cooling fan, finned housing and antenna connector
Kimpok 1.2G 4.5W FPV video transmitter with cooling fan, finned housing and antenna connector
Manufacturer / brandKimpok
Model1.2G 4.5W
Product type1.2GHz 4.5W analog FPV video transmitter for drones
Place of originChina
CertificationCE certification
Input voltageDC 7V ~ 30V

Product overview

The Kimpok 1.2G 4.5W is an analog video transmission component for drone FPV installations, with applications spanning racing, aerial imaging, inspection and mapping. Its radio architecture combines FM modulation with PLL frequency control across 1080 ~ 1360 MHz, offering 16 channels in bands A/B. Selectable output modes cover PIT, 25mW, 200mW, 2W and 4.5W. IRC control supports remote power and channel changes, together with OSD parameter adjustment, allowing these settings to be managed within an integrated FPV installation.

The transmitter measures 48.5 × 35 × 21.5 mm and weighs approximately 38.8g, defining its installation space and mass contribution. Its physical configuration incorporates an aluminum heat sink and cooling fan, with built-in temperature control for overheating protection. Electrical integration requires DC 7V ~ 30V input; the unit also provides DC 5V output. Video input is CVBS at 1Vp-p ±0.2V, and the antenna connection is SMA with 50-ohm impedance. Its operating temperature range is -10°C to +60°C.

Specifications

SpecificationValue & conditions
Manufacturer / brandKimpok
Model1.2G 4.5W
Product type1.2GHz 4.5W analog FPV video transmitter for drones
Place of originChina
CertificationCE certification
Input voltageDC 7V ~ 30V
Output voltageDC 5V
Frequency range1080 ~ 1360 MHz
Channel count16CH (Band A/B)
Modulation typeFM
Frequency controlPLL
Frequency stability±100KHz (Typ.)Typical.
Frequency accuracy±200KHz (Typ.)Typical.
Signal-to-noise ratioGreater than 55dBc
Antenna portSMA (50 Ohms)
Video inputCVBS 1Vp-p ±0.2V
Control protocolIRC
Selectable power levelsPIT / 25mW / 200mW / 2W / 4.5W
Dimensions48.5 * 35 * 21.5 mm
WeightApprox. 38.8g
Operating temperature-10℃ ~ +60℃
Integrated coolingIntegrated aluminum heat sink and cooling fan
Thermal protectionBuilt-in temperature control for overheating protection
OSD parameter adjustmentIRC protocol OSD parameter adjustment
Remote adjustmentRemote power and channel adjustment through IRC
Intended applicationsFPV drone racing; aerial photography and videography; industrial UAV inspection and mapping; outdoor long-distance video transmission

Ask for the Kimpok 1.2G 4.5W price ↑

More datalinks, video & radio from Chinese manufacturers →
Tatusky 860-930MHz 50W PA GaN module with silver metal housing, wires and RF connector
Component

Tatusky 860-930MHZ 50W PA GaN Module

By Tatusky Technology Co., Ltd

Tatusky Technology Co., Ltd’s 860-930MHZ 50W PA GaN Module is an RF amplifier component for counter-drone applications. It uses GaN technology and provides an SMA RF connection plus supply, ground and enable wires. Dimensions exclude SMA; electrical and temperature limits are specified, while two conflicting weight values remain unresolved.

XK-F415E wireless video and data transmission unit with a black finned housing, two fans and external connectors.
Component

Xingkai XK-F415E

Xingkai

The Xingkai XK-F415E is wireless video and data link equipment for UAV camera, flight-control, gimbal and remote-control traffic. Airborne and ground endpoints combine Ethernet, serial and SBUS connections with dual antennas. It supports point-to-point, multipoint and relay networks, with shared bandwidth, defined power requirements and endpoint-specific camera and monitoring-computer limits.

LUOWAVE LW-B210 software-defined radio in a blue enclosure with its connector panel visible
Component

Tabebuia LUOWAVE LW-B210

By Wuhan Tabebuia Technology Co., Ltd

The LUOWAVE LW-B210 is a dual-channel software-defined radio with an AD9361 RF front end, programmable Xilinx FPGA options and USB 3.0 connectivity. It covers 70MHz to 6GHz with maximum bandwidth of 56MHz per channel. Board, module and integrated chassis configurations provide distinct integration envelopes; the chassis includes a processor and memory.

GEPRC TinyRadio ELRS remote controller in an open storage case
Component

GEPRC TinyRadio ELRS Remote Controller

By GEPRC

The GEPRC TinyRadio ELRS Remote Controller is a compact handheld transmitter for multirotors and airplanes, with an integrated ExpressLRS module, eight channels and selectable transmit power up to 500 mW. It offers replaceable battery and antenna arrangements, Bluetooth simulator connectivity, and Standard or Combo packages, both supplied without batteries.

GOFLY-RC Pagoda-2 5.8G FPV antenna with black circular housing and MMCX connector
Component

GOFLY-RC Pagoda-2 Omni Antenna 5.8G FPV Antenna MMCX

GOFLY-RC

The GOFLY-RC Pagoda-2 Omni Antenna 5.8G FPV Antenna MMCX is a separately supplied FPV antenna weighing 8.9g. It offers 55mm or 80mm lengths and selectable connector configurations. Electrical specifications include a 5.8GHz center frequency, 500MHz bandwidth, and matching limits qualified at the center frequency.

KEEP EXPLORING

Similar products

Browse all products ↗
Black RadioMaster TX16S MK3 radio controller (ELRS / M2) with twin control sticks and a large screen
Links & controllers

RadioMaster TX16S MK3 Radio Controller (ELRS / M2)

By RadioMaster

The RadioMaster TX16S MK3 (ELRS / M2) is a radio controller with dual-band Gemini-X ExpressLRS, up to 16 channels and a 5-inch touchscreen. Standard Hall sensor gimbals, modular shoulder panels and a JR-compatible module bay support configuration changes. The package includes carrying and setup accessories; batteries and a MicroSD card are excluded.