ChinaDrone.Request a quote ↗
COMPONENT

Klesman SS06440HV

By Shenzhen Kelaismann Technology Co., Ltd ↗

The Klesman SS06440HV is a 22.2V, 44000mAh rechargeable solid-state battery for drone, FPV and agricultural UAV power systems. Weighing 5.37KG, it specifies a 10C discharge rate and 1-3C charging ratio, with separate charging and discharge temperature limits and protection against overcharge, short circuit and over discharge.

Get a free sourcing quote for Klesman SS06440HV

BrandKlesman
ModelSS06440HV
FAQ model designation44000
Product nameSolid State Drone Batteries UVA
Rechargeable battery designationUVA Rechargeable Solid State Battery
Country of originChina

Product overview

The Klesman SS06440HV is a rechargeable solid-state battery intended to power drones, FPV aircraft and agricultural UAVs. Its product designation is UVA Rechargeable Solid State Battery, with an electrical specification of 22.2V and 44000mAh. The battery weighs 5.37KG, making mass allocation a concrete consideration when integrating it into an aircraft. Its stated uses also extend to aerial surveying, inspections, filming, scientific research and engineering work. The supplied hardware is a battery component for integration into a UAV power system.

Electrical operation is specified with a 10C discharge rate and a charging ratio of 1-3C. Charging has a temperature range of -20℃~45℃, while discharge has a separate range of -40℃~60℃. Storage temperature is -20°C to 60°C; a separate storage-type entry gives -40-45℃ without reconciling the two ranges. Protection functions cover overcharge, short circuit and over discharge. The certification designations are CE and MSDS. SS06440HV is the detailed model identifier, while 44000 is also used as a model designation.

Specifications

SpecificationValue & conditions
BrandKlesman
ModelSS06440HV
FAQ model designation44000
Product nameSolid State Drone Batteries UVA
Rechargeable battery designationUVA Rechargeable Solid State Battery
Country of originChina
Battery typeSolid State Battery
Voltage22.2V
Capacity44000mAh
Discharge rate10C
Charging ratio1-3C
Weight5.37KG
Charge operating temperature-20℃~45℃During charging.
Discharge operating temperature-40℃~60℃During discharge.
Storage temperature-20°C To 60°CDuring storage.
Storage type-40-45℃
CertificationsCE, MSDS
Safety featuresOvercharge Protection, Short Circuit Protection, Over Discharge Protection
ApplicationsDrone/FPV Drone/ Agriculture UAV
FeaturesFPV Solid State Drone Batteries, 44000mAh Battery, 44000mAh Battery

Ask for the Klesman SS06440HV price ↑

HAKRC 6-axis distribution board with white connectors and gold solder pads, front view
Component

HAKRC 6-axis distribution board

HAKRC

The HAKRC 6-axis distribution board is an L5013C-based power distribution and step-down BEC component for UAV electronics. The 26g board provides independent 5V supplies, dual 12V outputs and built-in current sensing. It accepts 8.4~50.8 V from 2-12S LiPo batteries; 12V output requires 4S~12S LiPo input.

Small drone expansion kit high power matrix lighting fixture with stacked LED panels
Component

Zhongke Ruitai Small drone expansion kit

By Guangdong Zhongke Ruitai Intelligent Technology Co., Ltd.

Guangdong Zhongke Ruitai Intelligent Technology Co., Ltd.’s Small drone expansion kit provides modular tethering, broadcasting, lighting and material-release equipment. Its range includes integrated operating software, dual shouting and lighting modules, a throwing module carrying up to 2KG, and independently powered matrix lighting. Ground power through tethered cables enables 24-hour uninterrupted hovering.

Team BlackSheep XT60 Pigtail (16awg) with red and black wires and a yellow XT60 connector
Component

TBS XT60 Pigtail (16awg) Cable

TBS

The Team BlackSheep XT60 Pigtail (16awg) is a battery connection lead for quad builds, supplied with a pre-soldered XT60 connector. It combines 16 AWG wire, silicone jacketing and black/red colors in an 11-12cm length, with a current rating of 60A.

ISDT Air8 battery charger with display and small accessories
Component

ISDT Air8 Battery Charger

By ISDT

The ISDT Air8 is a digital battery charger supporting BattAir smart battery communication, automatic charging setup and ISDLink wireless controls. It accommodates 1–8S lithium batteries, including 4.45 V cells, plus lead-acid and nickel batteries, with firmware updates through computer-connected USB or mobile-app OTA.

GEPRC 6S 380mAh 90/180C LiHV battery with power leads and connectors
Component

GEPRC 6S 380mAh 90/180C HV 3.8V/4.35V LiHV Battery

By GEPRC

The GEPRC 6S 380mAh 90/180C HV 3.8V/4.35V LiHV Battery is a power pack intended for 2-3 inch drones. Supplied as one battery, it combines a 6S1P configuration, 22.8V nominal voltage and XT30 connections in a 62.6g package. Integration must accommodate its dimensions, LiHV charging requirements and per-cell voltage limits.

KEEP EXPLORING

Similar products

Browse all products ↗
CAN-PSU power monitoring module in a black enclosure
Batteries & charging

ZHTAERO CAN-PSU Power Module

ZHTAERO

The ZHTAERO CAN-PSU is an aircraft power monitoring module for real-time voltage and current monitoring. It weighs 9g, requires a 5V input, uses DroneCan CAN bus differential communication, and supports Hobbywing and T-motor series CAN bus electronic speed controllers.

SkyRC G630 Charging Hub with six battery connectors in a black enclosure
Batteries & charging

SkyRC G630 Charging Hub

SKYRC

The SkyRC G630 Charging Hub is a compact battery charging management accessory for UAV and agricultural drone operations. Paired with the PC1080C charger, it prioritizes batteries with higher remaining capacity. An anodized aluminum enclosure houses support for 6S LiPo/LiHV batteries, with a specified maximum current of 30A and input/output reverse polarity protection.