Product overview
The GEPRC 6S 380mAh 90/180C HV 3.8V/4.35V LiHV Battery supplies power for 2-3 inch drones, with toys, boats and quadcopters also listed as applications. Its 6S1P architecture combines a 380mAh capacity with 22.8V nominal voltage and 8.66WH of energy. The pack measures 17*40.5*55(mm) and weighs 62.6g, providing concrete dimensions and mass for battery-bay planning. XT30 connectors are specified for both charging and discharge. The supplied configuration is one battery, with continuous and burst discharge ratings of 90C and 180C respectively.
Charging requires attention to the LiHV cell limits: full charge must not exceed 4.35V per cell, and discharge must not fall below 3.5V per cell. The specification recommends 1C charging, while the FAQ recommends 1-1.5C; both allow a maximum of 3C. Charging is limited to 0-45°C, and a recently used pack must cool below 45°C first. Discharge operation spans -20-60°C. Long-term storage calls for 3.80V-3.85V per cell and a charge-discharge activation within three months.
Specifications
| Specification | Value & conditions |
|---|---|
| Product identity | GEPRC 6S 380mAh 90/180C HV 3.8V/4.35V LiHV Battery |
| Model designations | GEP 6S 380mAh; specification model: GEPRC 6S 380mAh |
| Intended drone size | 2-3 inch drones |
| Capacity | 380mAh |
| Configuration | 6S1P |
| Nominal voltage | 22.8V |
| Battery type | LiHV |
| Energy | 8.66WH |
| Dimensions | 17*40.5*55(mm) |
| Weight | 62.6g |
| Maximum continuous discharge rate | 90CContinuous discharge. |
| Maximum burst discharge rate | 180CBurst discharge. |
| Charge connector | XT30 |
| Discharge connector | XT30 |
| Recommended charging current | 1C |
| Maximum charging current | 3C |
| Operating temperature | 0-45°CCharging. |
| Operating temperature | -20-60°CDischarging. |
| Relative humidity | 65%RH +/-20%Operation. |
| Temperature | -20-35°CStorage. |
| Relative humidity | 65%RH +/-20%Storage. |
| Cycle life | 300+ cycles |
| Maximum charging voltage per cell | Not more than 4.35VLiHV cell at full charge. |
| FAQ charging recommendation | Recommended 1-1.5C; supports up to 3C |
| Recommended chargers | HOTA D6 PRO, ISDT 608AC and ToolkitRC M6D |
| Applications | Toys, boats and quadcopters |
| Supplied configuration | 1 x GEPRC 6S 380mAh 90/180C batteryIncluded equipment. |
| Minimum discharge voltage per cell | Cannot be lower than 3.5V; over-discharge can cause damage and swellingDischarging a LiHV cell. |
| Storage voltage and maintenance | Maintain 3.80V-3.85V per cell; perform a charge-discharge activation within 3 monthsLong-term storage. |
| Cooling requirement | Allow the battery to cool below 45°C before chargingCharging after use. |
Request a quote for GEPRC 6S 380mAh 90/180C HV 3.8V/4.35V LiHV Battery
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
