ChinaDrone.Request a quote ↗
COMPONENT

JND ST-26-M3GL

By Shenzhen JND Technology Co., Ltd ↗

The JND ST-26-M3GL from Shenzhen JND Technology Co., Ltd is a compact GNSS receiver module for embedded positioning. It combines an AG3331 chipset, multiple satellite-system support and serial position, velocity and time output in a 16x12x2.4mm surface-mount package. Operation requires 3.3V, with maximum current consumption of 35mA.

Get a free sourcing quote for JND ST-26-M3GL

ST-26-M3GL GNSS module with a metal shield and green circuit board
ST-26-M3GL GNSS module with a metal shield and green circuit board
Product typeSingle-frequency, dual-mode GNSS module
ChipsetAG3331
Supported satellite systemsGPS, BDS, GLONASS, Galileo and SBAS (WAAS, EGNOS, MSAS, GAGAN)
Sensitivity-165dBm
Maximum current consumption35mA maximumAt 3.3V.
Operating voltage3.3V

Product overview

Shenzhen JND Technology Co., Ltd's JND ST-26-M3GL is a single-frequency, dual-mode GNSS engine module built around the AG3331 chipset. It accepts GNSS signals through an antenna input and delivers position, velocity and time messages over a serial interface using an NMEA-0183-compliant or custom protocol. Supported satellite systems include GPS, BDS, GLONASS and Galileo, together with SBAS services WAAS, EGNOS, MSAS and GAGAN. Its receiver front end incorporates a high-gain low-noise amplifier and is described as having low insertion loss.

The module measures 16x12x2.4mm and uses a surface-mount package with castellated holes, providing a compact component for integration into portable equipment. Stated integration examples include personal navigation devices, mobile phones, cameras and vehicle navigation systems. Its electrical requirements are 3.3V operation and a maximum current consumption of 35mA at that voltage, with an operating temperature range of -40 to 85°C. Sensitivity is specified as -165dBm; fast acquisition at low signal levels is described without a numerical time-to-first-fix specification.

Specifications

SpecificationValue & conditions
Product typeSingle-frequency, dual-mode GNSS module
ChipsetAG3331
Supported satellite systemsGPS, BDS, GLONASS, Galileo and SBAS (WAAS, EGNOS, MSAS, GAGAN)
Sensitivity-165dBm
Maximum current consumption35mA maximumAt 3.3V.
Operating voltage3.3V
Operating temperature range-40 to 85°C
Dimensions16x12x2.4mm
Mounting formatSurface-mount package with castellated holes
Signal input and data outputGNSS antenna input; serial output carrying position, velocity and time
Output protocolsNMEA-0183-compliant or custom protocol
Receiver front endBuilt-in high-gain LNA and low insertion loss
Time to first fixVery fast TTFF; no numerical duration specifiedAt low signal levels.
Advanced functionsAlwaysLocate; AIC
Materials complianceRoHS compliant, lead-free

Ask for the JND ST-26-M3GL price ↑

More flight controllers & GNSS from Chinese manufacturers →
EMAX Mini Magnum III F4 flight controller board with micro-USB port and mounting holes
Component

EMAX Mini Magnum III Parts - F4 Flight Controller

By EMAX

The EMAX Mini Magnum III Parts - F4 Flight Controller is an F4-class replacement component for the BabyHawk R Pro 4-inch and Hawk Sport/Pro. It specifies the MatekF405 target and requires a Betaflight board-orientation check before flight, with a possible installation-dependent yaw adjustment.

HAKRC 35A miniF7 flight controller and ESC stack with orange mounting bushings
Component

HAKRC 35A miniF7 Stack

HAKRC

Shenzhen Haike Technology Co., Ltd.’s HAKRC 35A miniF7 Stack is a UAV electronics assembly combining a flight controller and BLS 35A four-in-one ESC. It provides compact 20 × 20mm mounting, 2S–6S LiPo input, receiver interfaces and a DJI FPV connection, with conflicting processor and IMU descriptions affecting configuration clarity.

GEPRC GEP-F722-45A AIO V2 flight controller and ESC board
Component

GEPRC GEP-F722-45A AIO V2

By GEPRC

The GEPRC GEP-F722-45A AIO V2 is an integrated flight controller and ESC board for drone builds. It combines an STM32F722 processor, 42688 motion sensing, five UART ports and a DJI Air Unit connector in a 32x32mm package, supplied with power and connection accessories.

JIYI K++V2 flight controller with black housing and connector ports
Component

JIYI K++V2

JIYI

The JIYI K++V2 is an agricultural UAV flight control system with dual processors, redundant sensors and autonomous spraying functions. It supports specified multirotor layouts, navigation and sensing expansion, and pump control. Its integration requirements include defined component dimensions, battery configurations, PWM ESC support, temperature limits and wind resistance ratings.

KEEP EXPLORING

Similar products

Browse all products ↗
GEPRC TAKER F722 35A 32Bit AIO flight controller and ESC board
Flight control & navigation

GEPRC TAKER F722 35A 32Bit AIO

By GEPRC

The GEPRC TAKER F722 35A 32Bit AIO is a compact flight-controller and ESC electronics assembly for UAV integration. Its 9.3g board combines an STM32F722 processor, SPI inertial sensor, barometer, five UARTs and a dedicated HD VTX connector, with 2–6S LiPo input and 35A continuous current.

Flight control & navigation

BWSENSING BW-AH55

BWSENSING

The BWSENSING BW-AH55 is a low-cost CAN-interface attitude and heading reference system for UAVs and other equipment. Packaged and bare-board formats have distinct installation dimensions. It supports dynamic and static measurements, compensated processing and output up to 100Hz, using a 5-12V DC supply.

Flight control & navigation

Foxeer F405 V2 (Plug) FC Reaper 55A ESC 8S Stack

By Foxeer

The Foxeer F405 V2 (Plug) FC Reaper 55A ESC 8S Stack is a UAV electronics assembly pairing a sensor-equipped Betaflight flight controller with a four-channel ESC. It provides peripheral connections, dual BEC outputs on the flight controller and 30.5mm mounting patterns, with both boards and integration cables supplied in the stack package.