Product overview
The GEPRC TAKER F722 35A 32Bit AIO combines flight-control electronics and a 32-bit ESC in a board measuring 35mm × 33.5mm and weighing 9.3g. Its STM32F722 processor works with an SPI-connected ICM 42688-P inertial sensor, while a built-in barometer adds another onboard sensor. Integration requires a 25.5mm × 25.5mm mounting pattern with M3 damping to M2 screws. Five full UART ports provide connections for external devices, and a dedicated six-pin connector underneath supports direct HD video-transmitter installation.
The supplied configuration includes the AIO flight controller, a 7cm XT30-18AWG wire, a 35V 220μF capacitor, an SH1.0 six-pin cable and eight black M2×6.5mm damping balls. Electrical integration is bounded by 2–6S LiPo input, a 5V@3A BEC and 35A continuous current. The burst rating is described as 45A for 10 seconds, although the specification entry reads “45A(10A).” Firmware provisions include the GEPRC_F722_AIO target, INAV compatibility, Betaflight OSD and onboard Blackbox logging; the memory is specified as 16Mb but also described as 16MB.
Specifications
| Specification | Value & conditions |
|---|---|
| Model | GEPRC TAKER F722 35A 32Bit AIO |
| MCU | STM32F722 |
| IMU | ICM 42688-P (SPI) |
| Firmware target | GEPRC_F722_AIO |
| Blackbox memory | 16Mb on-board flash memory |
| OSD | Betaflight OSD with AT7456E chip |
| UART connections | R1-T1 / R2-T2 / R3-T3 / R4-T4 / R5-T5; five full UART ports |
| Buzzer support | Yes |
| LED support | Yes |
| USB | Type-C USB |
| BEC output | 5V@3A |
| ESC | 32Bit 35A |
| Continuous current | 35A |
| Burst current specification | 45A(10A) |
| Burst current duration | 45A burst (10s)10-second burst. |
| Input voltage | 2~6S (LIPO)LiPo battery input. |
| ESC protocols | Dshot600, Oneshot, Multishot |
| Dimensions | 35mm * 33.5mm |
| Mounting hole size | 25.5 mm * 25.5mm φM3 damping to M2 screwM3 damping to M2 screw. |
| Weight | 9.3g |
| Barometer and INAV support | Built-in barometer; compatible with INAV firmware |
| HD VTX interface | Dedicated bottom-mounted 6-pin port for direct HD VTX connectionHD VTX connection through the dedicated bottom-mounted port. |
| Included equipment | 1× TAKER F722 35A AIO FC; 1× XT30-18AWG wire-7cm; 1× 35V 220μF capacitor; 1× SH1.0-6Pin cable; 8× black M2×6.5mm FC dampening ballsSupplied package. |
Request a quote for GEPRC TAKER F722 35A 32Bit AIO
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
