ChinaDrone.Request a quote ↗
COMPONENT

Shenzhen JND Technology Co., Ltd ST-26-GNF

By Shenzhen JND Technology Co., Ltd ↗

The Shenzhen JND Technology Co., Ltd ST-26-GNF is a single-frequency, dual-mode GPS/GNSS receiver module for positioning, tracking and navigation. It combines an eighth-generation UBX-M8030 chipset with built-in LNA, SAW and flash, and targets UAVs, multirotor aircraft, portable equipment and vehicle positioning applications.

Get a free sourcing quote for Shenzhen JND Technology Co., Ltd ST-26-GNF

ST-26-GNF GPS/GNSS receiver module with metal shield and green circuit board
ST-26-GNF GPS/GNSS receiver module with metal shield and green circuit board
Manufacturer and modelShenzhen JND Technology Co., Ltd ST-26-GNF
Product typeGPS/GNSS receiver module
Reception configurationSingle-frequency, dual-mode
Receiver chipsetEighth-generation UBX-M8030
Integrated componentsBuilt-in LNA, SAW and flash
Design characteristicsUltra-low power consumption, ultra-high sensitivity and ultra-small form factor

Product overview

The Shenzhen JND Technology Co., Ltd ST-26-GNF is a single-frequency, dual-mode GPS/GNSS receiver module for positioning, tracking and navigation. Its hardware combines an eighth-generation UBX-M8030 chipset with built-in LNA, SAW and flash. The receiver has an ultra-small form factor, with ultra-low power consumption and ultra-high sensitivity as qualitative design characteristics. Its intended aircraft applications include high-frequency flight-control model aircraft, UAVs, quadcopters, hexacopters and other multirotor aircraft.

Beyond aircraft applications, the ST-26-GNF is intended for portable devices, measurement equipment, personnel positioning management, tracking and speed-measurement equipment, and timing equipment. Other applications include in-vehicle DVD systems, personal navigation devices and digital video recorders. Vehicle uses encompass taxi, company-vehicle and logistics-fleet tracking, vehicle fault detection, fuel-level detection, automotive Internet of Things and excavator positioning. Pet tracking and student care management cards also fall within its intended application scope.

Specifications

SpecificationValue & conditions
Manufacturer and modelShenzhen JND Technology Co., Ltd ST-26-GNF
Product typeGPS/GNSS receiver module
Reception configurationSingle-frequency, dual-mode
Receiver chipsetEighth-generation UBX-M8030
Integrated componentsBuilt-in LNA, SAW and flash
Design characteristicsUltra-low power consumption, ultra-high sensitivity and ultra-small form factor
Intended functionsPositioning, tracking and navigation
Aircraft applicationsHigh-frequency flight-control model aircraft, UAVs, quadcopters, hexacopters and multirotor aircraft
Other applicationsIn-vehicle DVD systems, personal navigation devices, digital video recorders, portable devices, measurement equipment, personnel positioning management, tracking and speed-measurement equipment, timing equipment, pet tracking, student care management cards, vehicle tracking including taxis, company vehicles and logistics fleets, vehicle fault detection, vehicle fuel-level detection, automotive Internet of Things and excavator positioning

Ask for the Shenzhen JND Technology Co., Ltd ST-26-GNF price ↑

More flight controllers & GNSS from Chinese manufacturers →
RadioLink F405 flight controller circuit board with four red mounting holes
Component

RadioLink F405

RadioLink

The RadioLink F405 is a compact flight controller for racing drones, multirotors and other supported vehicles. It combines a 168MHz processor, inertial and pressure sensors, blackbox storage, six outputs and powered peripheral interfaces. Supplied as a controller-and-cable package, it supports ArduPilot, Betaflight and INAV, with a current restriction on firmware loading through Betaflight Configurator.

Unicore UFirebird II UC6580A and UC6580I GNSS chips.
Component

Unicore UFirebird II UC6580

By Unicore

The Unicore UFirebird II UC6580 is a dual-frequency, multi-system GNSS positioning chip for embedded applications including UAVs. It integrates RF and baseband functions in a compact QFN40 package, supports on-chip RTK, and offers automotive and industrial configurations. Procurement and integration depend on the selected temperature grade, electrical interfaces and firmware-qualified signal support.

H743 FC flight controller board with black circuit board and gold connection pads
Component

Pakanghobby H743 FC

By Shenzhen Pakanghobby CO., LTD

The PAKANG H743 FC is a compact Betaflight UAV flight controller built around an STM32H743VGT6 MCU with dual gyroscopes and a barometer. Its 36mm × 36mm board combines eight motor and four servo outputs, analog and digital video connections, receiver interfaces and three power-output rails for aircraft integration.

GEPRC TAKER F722 BLS 60A STACK flight controller and ESC board stack
Component

GEPRC TAKER F722 BLS 60A STACK

By GEPRC

The GEPRC TAKER F722 BLS 60A STACK is a UAV electronics assembly pairing an F722 flight controller with a four-in-one 60A ESC. Designed for direct DJI Air Unit connection, it supports 3–6S LiPo power and includes installation wiring and hardware. Both boards share a 30.5×30.5mm mounting pattern.

HAKRC 70A F7 Stack flight controller and ESC assembly with orange mounting grommets
Component

HAKRC 70A F7 Stack

HAKRC

The HAKRC 70A F7 Stack is a UAV electronics assembly pairing an F722 flight controller with a BLHeli-32 four-in-one ESC. Shared 30.5mm mounting spacing, receiver interfaces and a DJI FPV Air System connector support integration. The controller accepts 2S-6S Lipo, while the ESC specifies 2S-8S input and 70A continuous current.

KEEP EXPLORING

Similar products

Browse all products ↗
Flight control & navigation

Foxeer F722 V4 FC MPU6000 8S Dual BEC Barometer X8

By Foxeer

The Foxeer F722 V4 FC MPU6000 8S Dual BEC Barometer X8 is a compact FPV flight controller with an STM32F722RET6 CPU, DPS310 barometer and dual BEC outputs. It accepts 4–8S LiPo power, provides DJI/HDzero connectivity and supports X8 configurations through CLI setup. The package includes the controller, rubber columns and a cable.

Flight control & navigation

BWSENSING IMU400C

BWSENSING

The Beiwei Sensing IMU400C is a compact inertial measurement unit for unmanned aircraft, robotics, vehicles and stabilization systems. Its 60 × 59 × 29 mm package provides gyroscope and three-axis acceleration sensing, selectable serial outputs, sampling up to 500 Hz and temperature compensation across -40 °C to +85 °C.