Product overview
The GEPRC TAKER F722 BLS 60A STACK combines a GEP-F722-HD v2 flight controller with a GEP-BLS60A-4IN1 ESC for UAV flight-control and motor-control integration. Its DJI Air Unit connection accepts a direct plug connection, simplifying that part of the wiring. The controller uses an STM32F722 processor and an ICM42688-P IMU connected over SPI, with 16M onboard black-box storage. Five UARTs, a Type-C USB interface, an integrated LC filter and BetaFlight OSD with an AT7456E chip provide its principal control, connection and display features.
Installation requires space for a 36.85×36.85mm flight controller and a larger 42.9×39.7mm ESC. Both boards use a 30.5×30.5mm mounting pattern, with 4mm holes reduced to 3mm when the silicone shock-absorbing circles are fitted. Their individual weights are 8.1g and 13.7g respectively. Both accept 3–6S LiPo input. The ESC specifies 60A continuous current and a 65A burst limited to five seconds, supports Dshot 150/300/600 and current sensing, and uses target G_H_30; the flight controller firmware target is GEPRCF722.
The supplied configuration is an electronics stack for installation in a UAV. It contains one flight controller, one ESC and one capacitor, together with DJI Air Unit and flight-controller adapter cables and an XT60 power cable. Installation accessories comprise four M3×30 screws, four M3×25 screws, eight nylon nuts and eight silicone grommets. Two SH1.0 four-pin silicone cables and one camera connection cable are also included. The controller provides dual BEC power regulation, with a specified 5V@3A output for external equipment.
Specifications
| Specification | Value & conditions |
|---|---|
| Product | GEPRC TAKER F722 BLS 60A STACK; flight-control electronics stack designed for DJI Air Unit integration. |
| Stack components | GEP-F722-HD v2 flight controller paired with a GEP-BLS60A-4IN1 ESC. |
| Flight controller MCU | STM32F722 |
| Flight controller IMU | ICM42688-P(SPI) |
| Air Unit connection | Direct plugging into DJI Air Unit |
| Black box | 16M onboard |
| USB interface | Type-C |
| OSD | BetaFlight OSD with AT7456E chip |
| BEC | Dual BEC; specified output includes 5V@3A. |
| Flight controller firmware target | GEPRCF722 |
| Flight controller dimensions and mounting | 36.85×36.85mm; mounting pattern 30.5×30.5mm; hole diameter 4mm, reduced to 3mm with silicone shock-absorbing circles.Mounting holes become 3 mm in diameter with silicone shock-absorbing circles installed. |
| Flight controller input voltage | 3-6S LiPo |
| UART count | 5 |
| Power filter | Integrated LC filter |
| Flight controller weight | 8.1g |
| ESC model | GEP-BLS60A-4IN1 |
| ESC input voltage | 3-6S Lipo |
| ESC current sensing | Supported |
| ESC continuous current | 60A |
| ESC burst current | 65A5-second burst duration. |
| ESC control protocols | Dshot 150/300/600 |
| ESC dimensions and mounting | 42.9×39.7mm; mounting pattern 30.5×30.5mm; hole diameter 4mm, reduced to 3mm with silicone shock-absorbing circles.Mounting holes become 3 mm in diameter with silicone shock-absorbing circles installed. |
| ESC weight | 13.7g |
| ESC target | G_H_30 |
| Included electronics and wiring | 1 flight controller, 1 ESC, 1 capacitor, 1 DJI Air Unit adapter cable, 1 flight controller adapter cable and 1 XT60 power cable.Supplied configuration. |
| Included mounting hardware and additional cables | 4 M3×30 screws, 4 M3×25 screws, 8 nylon nuts, 8 silicone grommets, 2 SH1.0 4-pin silicone cables and 1 camera connection cable.Supplied configuration. |
Request a quote for GEPRC TAKER F722 BLS 60A STACK
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
