Product overview
The GEPRC TAKER F405 BLS 60A V2 STACK combines a GEP-F405-HD V3 flight controller with a TAKER H60_BLS 60A four-in-one ESC for UAV flight control and motor control. The controller uses an STM32F405 processor, an ICM42688-P IMU connected over SPI, a BMP280 barometer and 16M onboard black box storage. Integration interfaces include six UARTs, M1–M6 motor outputs, Type-C USB and a direct DJI Air Unit connection. BetaFlight OSD uses an AT7456E chip, while an integrated LC filter supports the power circuitry.
Installation requires a 30.5×30.5mm mounting pattern; the ESC measures 42×45.7mm. Silicone mounting inserts reduce the 4mm holes to 3mm. The flight controller weighs 7.3g and the ESC 14.9g, and both accept 3–6S LiPo input. The ESC specifies 60A continuous current and 65A for a five-second burst, with Dshot 150/300/600 support. The stack includes both boards, a capacitor, adapter and connection cables, an XT60 power cable, screws, nylon nuts and silicone grommets. Stack, flight-controller and ESC configurations are offered.
Specifications
| Specification | Value & conditions |
|---|---|
| Product | GEPRC TAKER F405 BLS 60A V2 STACK |
| Configuration options | STACK, FC, ESC |
| Flight controller model | GEP-F405-HD V3 Flight Controller |
| MCU | STM32F405 |
| IMU | ICM42688-P(SPI) |
| Black box | 16M onboard |
| Barometer | BMP280 |
| Motor outputs | M1-M6 |
| OSD | BetaFlight OSD w/ AT7456E chip |
| BEC | 5V@3A, [email protected] dual BEC |
| Flight controller firmware target | GEPRCF405 |
| Flight controller mounting | 30.5×30.5mm, φ4mm hole becomes φ3mm after using a silicone shock-absorbing circleFlight controller; φ3mm hole diameter with silicone shock-absorbing circle installed. |
| Flight controller input voltage | 3-6S LiPoFlight controller. |
| UART | 6 UARTs |
| Flight controller weight | 7.3gFlight controller. |
| ESC model | TAKER H60_BLS 60A 4IN1 ESC |
| ESC input voltage | 3-6S LipoESC. |
| Continuous current | 60AESC. |
| Burst current | 65A (5 second)ESC; 5 second burst. |
| Supported protocol | Dshot 150/300/600ESC. |
| ESC size and mounting | 42×45.7mm, hole30.5×30.5mm, φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring.ESC; φ3mm hole diameter with silicone shock-absorbing ring installed. |
| ESC weight | 14.9gESC. |
| ESC firmware target | B_X_30ESC. |
| Air Unit connection | Direct plugging into DJI Air Unit |
| USB interface | Type-C |
| Power filter | Integrated LC filter |
| Ammeter support | SupportedESC. |
| Included equipment | 1 × flight controller; 1 × ESC; 1 × capacitor; 1 × DJI Air Unit adapter cable; 1 × flight controller adapter cable; 1 × XT60 power cable; 4 × M3*30 screws; 4 × M3*25 screws; 8 × nylon nuts; 8 × silicone grommets; 2 × SH1.0 4-pin silicone cables; 1 × camera connection cable.Stack configuration. |
Request a quote for GEPRC TAKER F405 BLS 60A V2 STACK
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
