Product overview
The GEPRC TAKER F722 BL32 70A STACK combines a GEP-F722-HD v2 flight controller with a TAKER H70_96K four-in-one ESC for UAV electronics integration. Its DJI Air Unit connection accepts a direct plug-in cable, avoiding soldering at that connection. The controller pairs an STM32F722 processor with an ICM42688-P SPI inertial sensor, 16M onboard black-box storage, five UARTs and a Type-C USB interface. An integrated LC filter and dual BEC arrangement provide power-related integration features, including a specified 5V@3A output.
Installation requires space for a 36.85×36.85mm flight controller and a 42.6×42.1mm ESC, both using a 30.5×30.5mm mounting pattern. Silicone rings reduce the mounting-hole diameter from 4mm to 3mm. Both boards accept 3–6S LiPo input; the ESC specifies 70A continuous current and an 80A burst limited to five seconds. The supplied configuration is an electronics stack with a capacitor, adapter and connection cables, XT60 power cable, screws, nuts and silicone grommets for assembly.
Specifications
| Specification | Value & conditions |
|---|---|
| Product and architecture | GEPRC TAKER F722 BL32 70A STACK; plug-and-play electronics stack designed for DJI Air Unit integration. |
| Flight controller MCU | STM32F722 |
| Flight controller IMU | ICM42688-P(SPI) |
| Flight controller black box | 16M onboard |
| Flight controller OSD | BetaFlight OSD with AT7456E chip |
| Flight controller firmware target | GEPRCF722 |
| Flight controller dimensions and mounting | 36.85×36.85mm; mounting pattern 30.5×30.5mm; hole diameter 4mm, reduced to 3mm with silicone shock-absorbing rings.Mounting holes become 3 mm in diameter with silicone shock-absorbing rings installed. |
| Flight controller input voltage | 3-6S LiPo |
| Flight controller UART count | 5 |
| Flight controller weight | 8.1g |
| ESC input voltage | 3-6S LiPo |
| ESC PWM frequency | 24~96K |
| ESC continuous current | 70A |
| ESC burst current | 80A5-second burst. |
| ESC supported protocols | Dshot 150/300/600 |
| ESC dimensions and mounting | 42.6*42.1mm; mounting pattern 30.5×30.5mm; hole diameter 4mm, reduced to 3mm with silicone shock-absorbing rings.Mounting holes become 3 mm in diameter with silicone shock-absorbing rings installed. |
| ESC weight | 12.8g |
| ESC firmware target | GEPRC_G071_4IN1_96K |
| Flight controller model | GEP-F722-HD v2 |
| ESC model and architecture | TAKER H70_96K 4-in-1 ESC |
| Air Unit interface | Direct plug-in connection to DJI Air UnitDJI Air Unit connection. |
| USB interface | Type-C |
| Power filter | Integrated LC filter |
| BEC configuration | Dual BEC; specified 5V@3A output. |
| Supplied electronics and power wiring | 1 flight controller; 1 ESC; 1 capacitor; 1 DJI Air Unit adapter cable; 1 flight controller adapter cable; 1 XT60 power cable.Included equipment. |
| Supplied mounting hardware | 4 M3*30 screws; 4 M3*25 screws; 8 nylon nuts; 8 silicone grommets.Included equipment. |
| Additional supplied cables | 2 SH1.0 4-pin silicone cables; 1 camera connection cable.Included equipment. |
Request a quote for GEPRC TAKER F722 BL32 70A STACK
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
