The Holybro Pixhawk 6C Mini A&B Cable Set is identified by SKU 32001. It is a cable accessory set, with Pixhawk 6C Mini and A&B forming part of its complete product designation.
Holybro’s Pixhawk 6C Mini A&B Cable Set is a cable set with the Mini and A&B designations included in its model name.
The product carries SKU 32001.
| Specification | Value & conditions |
|---|---|
| Manufacturer | Holybro |
| Model | Pixhawk 6C Mini A&B Cable Set |
| SKU | 32001 |
The makeflyeasy PixPilot C3 is a compact, 37 g flight controller for small fixed-wing, VTOL fixed-wing and multirotor aircraft. It combines dual processors, paired inertial and barometric sensors, and multiple integration interfaces, with support for redundant external peripherals. The controller measures 76 × 45 × 16 mm and has an engineering-plastic shell.
The MAD PULSAR 8S H743 Flight Controller combines an STM32H743 + ICM42688P configuration with 8S voltage support and dual BEC outputs rated at 5V/3A and 12V/2.5A. It features a 30.5x30.5mm mounting pattern with 4mm holes, USB Type-C and a 14-pin plug-and-play FC port.
The GEPRC TAKER F722 45A 32Bit AIO is a compact UAV flight-controller and ESC assembly supplied with wiring, a capacitor and damping hardware. It combines an STM32F722 processor, SPI IMU, barometer, five full UARTs and a dedicated HD video transmitter connection in a 9.2g board supporting 2–6S LiPo input.
UING Intelligent Technology (Shenzhen) Co., Ltd.’s HAWK100 is an 80g flight-control unit for autonomous VTOL fixed-wing aircraft. It combines DSP-based control, an integrated bidirectional measurement and control data link, and expansion interfaces with aerial survey mission planning, photography control, photo POS storage and configurable flight protection.
The CUAV SKYE 2 Airspeed Sensor is an integrated airspeed measurement unit for unmanned systems, combining a pitot tube, environmental sensing, and controlled de-icing with drainage. Its compact body communicates through DroneCAN and supports ArduPilot and PX4. The default supply range is 18–68V; IP54 protection requires installation on request.
The ComNav K726 GNSS OEM Board provides dual-antenna positioning and heading for UAVs, precision agriculture and intelligent transportation systems.
A flight-controller and ESC stack for FPV freestyle drones.
The DolphinRC F405 80A FPV Stack is an FPV flight-control electronics product built around an STM32F405 controller and ICM42688P gyroscope. Its 36*36mm board combines Betaflight support, onboard sensors, OSD and black-box functions with GPS and DJI Air Unit connections, four UARTs, and regulated 5V and 12V outputs.
The BrotherHobby Returner 3-8S H743 Betaflight Flight controller is a 9g UAV control board with an STM32H743VIH6 processor, dual IMUs, OSD and barometer. Its 38.5 × 38.5mm footprint combines 3S-8S input, eight ESC outputs, four servo signals and seven serial ports, with plug-in and soldered peripheral connections.
The CUAV NEO 4 Nano GNSS Module is a miniature navigation component for unmanned systems, combining a u-blox M10 receiver, STM32H5 processor and electronic compass. Its 10.6 g body supports compact installations, while DroneCAN connects it to supported autopilot stacks. Four-system reception, configurable navigation rates and integrated status indicators define its main integration capabilities.