Product overview
Holybro’s Pixhawk 6C Cable Set is a cable-set product designated SKU 18079.
Specifications
| Specification | Value & conditions |
|---|---|
| Manufacturer | Holybro |
| Product model and configuration | Pixhawk 6C Cable Set |
| SKU | 18079 |
Pixhawk 6C Cable Set
By Holybro ↗The Holybro Pixhawk 6C Cable Set is identified by SKU 18079.
ManufacturerHolybro
Product model and configurationPixhawk 6C Cable Set
SKU18079
Related guides
Flight controllers & GNSS from other brands
More flight controllers & GNSS from Chinese manufacturers →
Component
RadioLink PIXHAWK Flight Controller
RadioLinkRadioLink PIXHAWK is a version 2.4.8 flight controller supplied with a power module and installation accessories. Its compact hardware combines onboard sensors, waypoint memory and connections for receivers, motor outputs, navigation and telemetry. External I2C expansion supports SUI04 ultrasonic sensing, while the included power module accepts 2-12S (7.4-50.4V).
Component
GOFLY-RC 20×20 Micro F4 Flight Controller
GOFLY-RCThe GOFLY-RC 20×20 Micro F4 Flight Controller is a spare controller for the Scorpion 80 that also supports use in other FPV drones. It combines STM32F411 processing, an MPU-6000 sensor, Betaflight MATEKF411 firmware and built-in OSD. It has 20x20mm mounting holes and includes one connection wire.
Component
HOBBYWING XRotor Micro Flight Controller F4 G3
HOBBYWINGThe HOBBYWING XRotor Micro Flight Controller F4 G3 is a 36*36mm, 6g control board for 130-300mm FPV quadcopters. It combines an STM32F405 processor, six-axis sensing, built-in OSD and a 12V @ 2A BEC. Its integrated Pit Switch enables remote VTx switching after adjustment through FMU parameter software.
Component
BrotherHobby Returner 3-8S F435 Betaflight Flight Controller
By BrotherHobbyThe BrotherHobby Returner 3-8S F435 Betaflight Flight Controller combines an AT32F435RGT7 processor with onboard inertial, barometric and OSD hardware. This 7.82 g controller supports 3S-8S input, eight ESC outputs, multiple receiver protocols and DJI connections, with a 30.5 × 30.5 mm mounting pattern for installation.
Component
ComNav T300 GNSS Receiver
By ComNavThe ComNav T300 is a GNSS receiver with documented UAV applications.
Component
STARTRC Drone S8 FPV Simulator -8CH Drone Flight Training System
By Shenzhen STARTRC Technology Co., Ltd.The STARTRC Drone S8 FPV Simulator Controller is a USB-powered, eight-channel training controller with dual-bearing joysticks and customizable channels 5-8. It connects to computers through USB Type-C and mobile devices through OTG. Weighing 140 g, it supports multiple simulator platforms, requires separately purchased simulator software, and cannot control real drones.
KEEP EXPLORING
Browse all products ↗Similar products
Flight control & navigation
HAKRC EF60 65A Stack
HAKRCThe HAKRC EF60 65A Stack is a flight-control and electronic speed-control assembly pairing a HAKRC 4551 controller with an EF60 65A ESC. It provides onboard sensing, OSD, recording and regulated power outputs. Integration must accommodate different board dimensions and input ranges, including the ESC’s 2-6S limit.
Flight control & navigation
ZHTAERO C-RTK 2HP RTK Module
ZHTAEROThe ZHTAERO C-RTK 2HP is a dual-antenna RTK module for yaw, positioned within the flight-control GPS/RTK category. Its defining configuration is the pairing of two antennas with the module’s stated yaw function and RTK identity.
Flight control & navigation
JND ST-26-GNF2 GNSS Module
By Shenzhen JND Technology Co., LtdThe Shenzhen JND Technology Co., Ltd JND ST-26-GNF2 is a surface-mount GPS/GNSS receiver module intended for UAV navigation, tracking and other positioning applications. Its UBX-M8230 design integrates LNA, SAW and flash components, with selectable output interfaces, configurable NMEA sentences, retained settings and a 1Hz-10Hz refresh rate.
Flight control & navigation
JND ST-91-U7L GNSS Module
By Shenzhen JND Technology Co., LtdThe JND ST-91-U7L from Shenzhen JND Technology Co., Ltd is a compact U-blox7-based GPS/GNSS receiver module for positioning, tracking and navigation. Its surface-mount architecture incorporates RF signal conditioning and precision timing components. Configurable serial output, adjustable navigation updates, optional USB 2.0 and optional configuration-retention flash support integration into host electronics.