ChinaDrone.Request a quote ↗
COMPONENT

HOBBYWING V13823

By HOBBYWING ↗

The V13823 is a component in HOBBYWING's VTOL drone propulsion range.

Request a quote ↗
HOBBYWING V13823 VTOL motor with black cylindrical housing and central shaft.
HOBBYWING V13823 VTOL motor with black cylindrical housing and central shaft.
Recommended thrust per rotor30~35kg/RotorRecommended range, not a stated maximum thrust.
ModelHOBBYWING V13823
ApplicationPropulsion for medium and large VTOL aircraft
Maximum thrust70.6 kg
Weight2160 g
Thrust-to-weight ratio32.5

Product overview

The V13823 is listed for a 24S LiPo battery and has a KV rating of 60KV.

HOBBYWING recommends 30~35kg of thrust per rotor for this model.

Specifications

SpecificationValue & conditions
Recommended thrust per rotor30~35kg/RotorRecommended range, not a stated maximum thrust.
ModelHOBBYWING V13823
ApplicationPropulsion for medium and large VTOL aircraft
Maximum thrust70.6 kg
Weight2160 g
Thrust-to-weight ratio32.5
Propeller controlIntelligent Propeller Control (IPC); low power consumption and highly accurate propeller positioning
Propeller stop positioningCustomizable propeller stop positions to reduce aerodynamic drag and energy consumption during cruise flightPaired with HOBBYWING’s IPC ESC
Iron core material0.2 mm low-loss silicon steel sheet; punched iron core
Winding wire220 ℃ high-temperature-resistant enameled wire
Magnet structureArc-shaped magnets
Magnet gradeHigh-grade magnets
Mounting and propeller adaptersStandardized mounting interfaces and dedicated propeller adapters; supports a wide range of conventional propellers
Dust and grit protectionDual-layer steel mesh at bracket and bottom cover
CoolingOversized air outlets and high-efficiency centrifugal cooling fan
SOURCE WITH CHINADRONE

Request a quote for HOBBYWING V13823

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
AMPX 20A (3-4S) electronic speed controller with attached wires and connectors
Motors & ESCs

AMPX 20A (3-4S) ESC

By MAD Components

The MAD AMPX 20A (3-4S) ESC is an electronic speed controller identified by SKU 0102DT0320. Its model name carries a 20A current designation and a 3-4S battery configuration designation, which define the component’s stated electrical identifiers.

Scorpion HK-3536-510KV motor with gold end caps, black body, shaft and three connector leads
Motors & ESCs

Scorpion HK-3536-510KV Motor

By Scorpion

The Scorpion HK-3536-510KV Motor is a brushless motor for 600 class electric helicopters with narrow motor frames. Supplied with connectors, heat shrink and M3 screws, it accommodates up to 12s LiPo and has a maximum continuous power rating of 2900 Watts. Installation requires suitable gear spacing, and bearings need regular lubrication and periodic replacement.

GEPRC TAKER H65_8S_BLS 65A 4IN1 ESC circuit board on a white background
Motors & ESCs

GEPRC TAKER H65_8S_BLS 65A 4IN1 ESC

By GEPRC

The GEPRC TAKER H65_8S_BLS 65A 4IN1 ESC is a four-in-one electronic speed controller for UAV integration. It supports 3-8S Lipo input and Dshot 150/300/600, with 65A continuous current and a 70A five-second burst rating. The package includes cables, a capacitor and silicone mounting pads.