Product overview
The HOBBYWING M8110 Light is an industrial multirotor propulsion motor offered in 95KV and 110KV versions. Its outer-rotor construction combines a CNC-machined 7075 aluminium rotor bracket with a treated seamless-steel housing and 0.2 mm silicon steel core laminations. An integrated bracket and shaft supports stator-to-rotor alignment, while three M2.5×8 fasteners and washers secure the shaft end. Both versions occupy the same 87.1 mm diameter by 27.4 mm height envelope, with weights including wires of 300.5 g and 301.5 g respectively.
Mechanical integration uses four M4 motor mounting holes on a 36 mm diameter pattern, plus propeller mounting patterns of four M3 holes at 20 mm diameter and four M4 holes at 23 mm diameter. Each version has 100 mm, 16 AWG leads and a 12S LiPo rating. Recommended pairings include MSC propellers from 28x9.2 through 32x10.5 and the XRotor Pro H60A 14S ESC. These are application recommendations. Maximum current is qualified for a non-enclosed environment at ambient temperatures no higher than 25°C; both motors carry an IPX5 rating.
Specifications
| Specification | Value & conditions |
|---|---|
| Earlier name | M8110 ULListed for M8110 Light |
| Battery | 12S LiPoSpecified for M8110 Light |
| Recommended thrust | 3.0~4.0 kg/rotorManufacturer recommendation per rotor; listed with 12S LiPo and 95KV/110KV options |
| Model variants | M8110 Light 95KV; M8110 Light 110KVDistinct variants listed within the M8110 Light range. |
| Bracket and shaft design | Integrated bracket and shaftM8110 Light construction. |
| Rated voltage | 12S LiPoListed for both M8110 Light 95KV and M8110 Light 110KV. |
| Product identity and purpose | HOBBYWING M8110 Light industrial multirotor UAV motor. |
| Motor variants | M8110 Light 95KV; M8110 Light 110KV. |
| KV value | 95; 110.Values correspond to the 95KV and 110KV variants, respectively. |
| Motor dimensions | Diameter 87.1 × height 27.4 mm.Both variants. |
| Stator construction | High-quality silicon steel laminations, rust protection and a coating resistant to 180°C.Both variants. |
| Enamelled wire temperature grade | 200°C.Both variants; winding-wire grade. |
| Magnet temperature grade | 180°C.Both variants; magnet grade. |
| Insulation withstand voltage | 500 V AC withstand test.Both variants; coil insulation test. |
| Ingress protection rating | IPX5.Both variants. |
| Slots and poles | 36 slots; 42 poles.Both variants. |
| Dynamic balance standard | ≤10 mg.Both variants; complete motor. |
| Bearings | High-quality waterproof bearings.Both variants. |
| Output shaft diameter | /.Both variants. |
| Propeller mounting holes | 4×M3@D20mm + 4×M4@D23mm.Both variants. |
| Motor mounting holes | 4×M4@D36mm.Both variants. |
| Rated battery voltage | 12S LiPo.Both variants. |
| No-load current | 1.1 A; 1.27 A.Values correspond to the 95KV and 110KV variants, respectively. |
| Maximum current | 43.3 A; 39.2 A.Non-enclosed environment at ambient temperature ≤25°C; values correspond to the 95KV and 110KV variants, respectively. |
| Maximum thrust | 11.4 kg; 11.1 kg.Values correspond to the 95KV and 110KV variants, respectively. |
| Phase-to-phase resistance | 132.9 mΩ; 112.3 mΩ.Values correspond to the 95KV and 110KV variants, respectively. |
| Lead wire gauge | 16 AWG.Both variants. |
| Lead length | 100 mm.Both variants. |
| Motor weight | 300.5 g; 301.5 g.Including wires; values correspond to the 95KV and 110KV variants, respectively. |
| Rated output power | 331.5 W.Both variants; maximum continuous output. |
| Recommended propellers | MSC 28x9.2; MSC 29x9.5; MSC 30x9.8; MSC 32x10.5.Recommended application combinations for both variants. |
| Recommended ESC | XRotor Pro H60A 14S.Recommended application combination for both variants. |
| Application thrust range | 3.0–4.0 kg.Recommended application range per rotor for both variants. |
| Quadrotor maximum takeoff weight | 12.0–16.0 kg.Recommended quadrotor application for both variants. |
| Shaft and bracket architecture | Integrated bracket and shaft; shaft end secured with three M2.5×8 fasteners and washers. |
| Structural and electrical materials | Precision CNC-machined 7075 aerospace aluminium rotor bracket; outer-rotor housing made from No. 20 seamless steel tube with nickel plating and electrophoretic treatment; flexible 16 AWG silicone wire; 0.2 mm low-loss silicon steel core laminations. |
Request a quote for HOBBYWING M8110 Light
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
