ChinaDrone.Request a quote ↗
COMPONENT

HOBBYWING M6210 HighProt

By HOBBYWING ↗

The HOBBYWING M6210 HighProt is a multirotor drone motor.

Request a quote ↗
HOBBYWING M6210 HighProt 170KV multirotor motor with three wires, viewed from above.
HOBBYWING M6210 HighProt 170KV multirotor motor with three wires, viewed from above.
HOBBYWING M6210 HighProt motor viewed from the side
HOBBYWING M6210 HighProt motor viewed from the side

Product overview

The HOBBYWING M6210 HighProt, originally named M6210 HP, is a propulsion motor for multirotor drones in HOBBYWING's 62XX range. Its specifications list 12S and 6S LiPo battery configurations, with corresponding 170KV and 320KV variants. The listed weights, including wires, are 231 g and 239 g, respectively, and the motor has an IP45 protection rating. HOBBYWING recommends 2.2–2.7 kg of thrust per rotor for this model; this range is a recommendation rather than a specified maximum thrust.

Specifications

SpecificationValue & conditions
Recommended thrust2.2–2.7 kg/rotorManufacturer recommendation per rotor for M6210 HighProt.
SOURCE WITH CHINADRONE

Request a quote for HOBBYWING M6210 HighProt

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
XRotor 3120 PRO motor with black housing, gold lettering and a threaded shaft
Motors & ESCs

XRotor 3120 PRO

By HOBBYWING

The HOBBYWING XRotor 3120 PRO is an outer-rotor UAV propulsion motor for professional aerial cinematography and racing. Available in 700KV and 1000KV configurations, it uses 8S and 6S LiPo power respectively. Both share the same mounting dimensions, cooling structure and shaft geometry, while differing in weight, electrical ratings, maximum thrust and recommended propulsion components.

Gemfan D3.5-3 clear yellow three-blade ducted propeller
Motors & ESCs

Gemfan D3.5-3 Ducted PC 3 Blade 1.5mm

By Gemfan

The Gemfan D3.5-3 Ducted PC 3 Blade 1.5mm is a polycarbonate propeller for 3.5-inch ducted FPV cinewhoops. It combines an 88.9 mm diameter with 3 inch pitch, supports normal and inverted mounting, and uses a 1.5 mm T-mount interface. The recommended motor is 2006, with a specified maximum takeoff weight of 350 g.