COMPONENT

HOBBYWING M13842 HighProt

By HOBBYWING ↗

The M13842 HighProt is a motor for ultra heavy-lift multirotor drones.

Request a quote ↗

HOBBYWING M13842 HighProt 38KV motor with black housing and three wires.

HOBBYWING M13842 HighProt 38KV motor with three black leads.

Battery configuration24SLiPo battery configuration listed for M13842 HighProt.

Recommended thrust35–40 kg per rotorRecommended thrust per rotor, not a stated aircraft payload capacity.

Product overview

The M13842 HighProt belongs to HOBBYWING's 138XX motor series, designed for heavy-duty, high-torque propulsion in ultra heavy-lift multirotor drones.

The product listing specifies a 24S LiPo battery configuration and recommends 35–40 kg of thrust per rotor.

Specifications

Specification	Value & conditions
Battery configuration	24SLiPo battery configuration listed for M13842 HighProt.
Recommended thrust	35–40 kg per rotorRecommended thrust per rotor, not a stated aircraft payload capacity.

SOURCE WITH CHINADRONE

Request a quote for HOBBYWING M13842 HighProt

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗

Motors & ESCs

HKIV-4020 Shaft Kit (5mm 31mm)

By Scorpion

The Scorpion Power System HKIV-4020 Shaft Kit (5mm 31mm) is a helicopter motor shaft accessory with listed 5mm and 31mm dimensions. Packaged weight is 33g. Photographs may not accurately establish the supplied quantity, dimensions, color or features.

View product →Enquire ↗

Flight control & navigation

GEPRC TAKER F722 35A 32Bit AIO

By GEPRC

The GEPRC TAKER F722 35A 32Bit AIO is a compact flight-controller and ESC electronics assembly for UAV integration. Its 9.3g board combines an STM32F722 processor, SPI inertial sensor, barometer, five UARTs and a dedicated HD VTX connector, with 2–6S LiPo input and 35A continuous current.

View product →Enquire ↗

Motors & ESCs

MAD PULSAR BL-S 8S 100A 4IN1 ESC

By MAD Components

The MAD PULSAR BL-S 8S 100A 4IN1 ESC is a four-in-one drone electronic speed controller using BLHeli_S. Continuous-current operation requires forced air cooling that keeps overall temperature below 90 degrees. Intended for budget-conscious builds and casual flying, it is unsuitable for long-endurance aircraft using low KV motors without forced air cooling.

View product →Enquire ↗

Motors & ESCs

HKII-4225 Shaft Kit (6mm 55mm)

By Scorpion

The Scorpion HKII-4225 Shaft Kit (6mm 55mm) is an extended replacement shaft kit for HKII-4225 series motors. It serves helicopter installations requiring a longer shaft for pinion fitment and counter-bearing support, with a weight of 42g including packaging.

View product →Enquire ↗