ChinaDrone.Request a quote ↗
COMPONENT

HOBBYWING C10040

By HOBBYWING ↗

The C10040 is a motor in HOBBYWING's fixed-wing drone propulsion range.

Request a quote ↗
HOBBYWING C10040 motor with cables on a white background
HOBBYWING C10040 motor with cables on a white background
Maximum thrust39 kg92V@29x12; source-listed configuration.
Drone applicationsFixed-wing and VTOLIntended applications stated for C10040.
IPC integrationOptional IPC component and configurable propeller stopping positionThe IPC component is optional; stopping-position customization requires pairing with an IPC ESC.
Propeller accommodationFolding and non-folding propellersThe rotor bracket uses a boss clearance design to prevent interference with propeller-root edges.

Product overview

The C10040 has a listed 90 KV rating and uses a LiPo-24S (92 V) battery.

Its specified maximum thrust is 39 kg under the listed 92V@29x12 condition.

Specifications

SpecificationValue & conditions
Maximum thrust39 kg92V@29x12; source-listed configuration.
Drone applicationsFixed-wing and VTOLIntended applications stated for C10040.
IPC integrationOptional IPC component and configurable propeller stopping positionThe IPC component is optional; stopping-position customization requires pairing with an IPC ESC.
Propeller accommodationFolding and non-folding propellersThe rotor bracket uses a boss clearance design to prevent interference with propeller-root edges.
SOURCE WITH CHINADRONE

Request a quote for HOBBYWING C10040

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
Pair of black T-MOTOR G20*6.5 glossy carbon fiber UAV propellers
Motors & ESCs

G20*6.5 Prop-2PCS/PAIR

By T-MOTOR

The T-MOTOR G20*6.5 Prop-2PCS/PAIR is a pair of glossy carbon-fiber-and-epoxy UAV propellers with an integrated two-blade design. Specified at 20*6.5 (508*165.1mm), they have a 10kg thrust limitation and an optimum range of 2900~5200 RPM/min. Motor installation requires attention to rotation markings and thread-locking adhesive.

MAD PULSAR BL-32 8S 100A 4IN1 ESC circuit board viewed from above
Motors & ESCs

MAD PULSAR BL-32 8S 100A 4IN1 ESC

By MAD Components

The MAD PULSAR BL-32 8S 100A 4IN1 ESC integrates four motor controllers into a 32g board for FPV drone builds. It uses BLHeli_32 firmware and supports up to 8S LiPo batteries. Its 100A continuous rating depends on forced air cooling, limiting suitability for long-endurance installations without that airflow.