Product overview
The MAD PULSAR BL-32 8S 100A 4IN1 ESC is a motor-control component for FPV drone builds. Its supplied architecture combines four electronic speed controllers on one board, with a stated weight of 32g. This arrangement consolidates motor-control hardware and reduces wiring within the build. BLHeli_32 firmware supports throttle response, motor control and ESC configuration, while battery support extends up to 8S LiPo. The product is an integrated ESC board rather than a complete flight platform or airframe kit.
Integration must account for cooling as well as electrical requirements. The 100A continuous-current rating requires forced airflow that keeps the overall temperature below 90 degrees. High-speed FPV flight is identified as providing the necessary airflow, but long-endurance aircraft using low KV motors without forced cooling are excluded. That restriction qualifies the intended long-range application. Configuration uses BLHeliSuite32, and using the wrong software suite prevents detection of the ESC.
Specifications
| Specification | Value & conditions |
|---|---|
| Product identity | MAD PULSAR BL-32 8S 100A 4IN1 ESC |
| SKU | 0102DT0515 |
| Architecture | Four ESCs integrated into one board. |
| Continuous current output | 100AForced air cooling must keep the overall temperature below 90 degrees. |
| Battery support | Up to 8S LiPo batteries. |
| Firmware | BLHeli_32 |
| Weight | 32g |
| Thermal requirement | Keep the overall temperature below 90 degrees.Continuous-current operation with forced air cooling. |
| Application limitation | Unsuitable for this aircraft configuration.Long-endurance aircraft using low KV motors without forced air cooling. |
| Configuration software | Use BLHeliSuite32; the wrong configuration suite will fail to detect the ESC.BLHeli_32 firmware configuration. |
| Intended applications | Freestyle, racing, and long-range FPV drones, subject to the cooling requirements. |
Request a quote for MAD PULSAR BL-32 8S 100A 4IN1 ESC
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
