Product overview
The GEPRC TAKER F722 BLS 80A V2 STACK combines the GEP-F722-HD V2 flight controller with a TAKER H80_BLS 80A four-in-one ESC for UAV flight control and motor control. Its controller uses an STM32F722 processor and an ICM42688-P IMU connected over SPI, with 16M onboard black box storage. Integration features include five UARTs, Type-C USB, direct DJI Air Unit connection, barometer support and BetaFlight OSD through an AT7456E chip. An integrated LC filter provides power filtering.
Installation space must accommodate two different board footprints: 36.85×36.85mm for the flight controller and 56.3*61.1mm for the ESC. Both use a 30.5×30.5mm mounting pattern, with φ4mm holes reduced to φ3mm when the silicone shock-absorbing inserts are fitted. The controller weighs 8.1g and the ESC weighs 28.1g. Both accept 3-6S LiPo input. The ESC uses dual MOS architecture and supports Dshot 150/300/600, with an 80A continuous-current rating and an 85A burst rating limited to five seconds.
The STACK configuration supplies the controller and ESC together with a dual 50V 2200uF filter board, DJI and FC adapter cables, and receiver, camera and VTX cables. Power connection hardware comprises an XT90 battery plug and a 10AWG 240mm red and black cable. Assembly hardware includes four M3*30 screws, four M3*25 screws, eight M3 nylon nuts and twelve M3 silicone anti-shake pads. This is an electronics assembly for integration into a UAV; the configuration options also include the flight controller or ESC separately.
Specifications
| Specification | Value & conditions |
|---|---|
| Product | GEPRC TAKER F722 BLS 80A V2 STACK |
| Configuration options | STACK, FC, ESC |
| Flight controller model | GEP-F722-HD V2 Flight Controller |
| Flight controller MCU | STM32F722 |
| Flight controller IMU | ICM42688-P(SPI) |
| Air Unit connection | Direct plugging into DJI Air Unit |
| Black box storage | 16M onboard |
| USB interface | Type-C |
| Barometer support | Supported |
| OSD | BetaFlight OSD w/ AT7456E chip |
| BEC | 5V@3A, [email protected] dual BEC |
| Flight controller firmware target | GEPRCF722 |
| Flight controller dimensions and mounting | 36.85×36.85mm, hole 30.5×30.5mm, φ4mm hole becomes φ3mm after using a silicone shock-absorbing circle.Mounting holes become φ3mm when silicone shock-absorbing circles are used. |
| Flight controller input voltage | 3-6S LiPo |
| UART count | 5 |
| Power filter | Integrated LC filter |
| Flight controller weight | 8.1g |
| ESC model | TAKER H80_BLS 80A 4IN1 ESC |
| ESC input voltage | 3-6S Lipo |
| ESC ammeter support | Supported |
| ESC continuous current | 80A |
| ESC burst current | 85A (5 second)5-second burst. |
| ESC supported protocols | Dshot 150/300/600 |
| ESC dimensions and mounting | 56.3*61.1mm, hole30.5×30.5mm, φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring.Mounting holes become φ3mm when silicone shock-absorbing rings are used. |
| ESC weight | 28.1g |
| ESC firmware target | B_X_30 |
| ESC MOS architecture | Dual MOS |
| Included equipment and installation hardware | 1 x GEP-F722-HD V2 Flight Controller; 1 x TAKER H80_BLS 80A 4IN1 ESC; 1 x filter board (Dual 50V 2200uF); 1 x DJI connection cable (SH1.0 6pin 100mm); 1 x FC adapter cable (SH1.0 8pin 30mm); 1 x receiver silicone cable (SH1.0 4pin 150mm); 1 x camera connection cable (SH1.0-SH1.25 3pin 60mm); 1 x VTX connection cable (SH1.0 4pin-6pin 100mm); 1 x XT90 battery plug; 1 x red and black power cable (10AWG 240mm); 4 x M3*30 screws; 4 x M3*25 screws; 8 x nylon nuts (M3); 12 x silicone anti-shake pads (M3).STACK configuration. |
Request a quote for GEPRC TAKER F722 BLS 80A V2 STACK
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
