ChinaDrone.Request a quote ↗
COMPONENT

GEP-F411-35A AIO (F411 FC 35A 2-6S 8bits BLS ESC 25.5mm)

By GEPRC ↗

The GEPRC GEP-F411-35A AIO is a compact flight controller and 35A ESC assembly for UAV integration. Its 32x32mm board weighs 8.8g and uses 25.5×25.5mm mounting holes. It accepts 2~6S LiPo input and comes with a cable, capacitor and damping rings, with a 40A burst rating limited to 10 seconds.

Request a quote ↗
GEPRC GEP-F411-35A AIO flight controller and ESC board with red mounting grommets
GEPRC GEP-F411-35A AIO flight controller and ESC board with red mounting grommets
ModelGEPRC GEP-F411-35A AIO
Hardware architectureAll-in-one F411 flight controller with 35A 8-bit BLS ESC
Flight controller MCUSTM32F411
IMUICM42688-P(SPI)
Flight controller targetGEPRC_F411_AIO
OSDBetaflight OSD w/ AT7456Ev

Product overview

The GEPRC GEP-F411-35A AIO combines flight control and electronic speed control in one board for UAV builds using the listed 1204, 1404, 1507, 1805 or 2004 motors and 2-5 inch propellers. Its STM32F411 controller is paired with an 8-bit BLS ESC, while Betaflight OSD supports parameter adjustment. The electrical operating range is 2~6S LiPo, with a continuous current rating of 35A. The higher 40A rating applies to a 10-second burst, which limits how that figure should be used when selecting a propulsion configuration.

Integration centers on a 32x32mm board with 25.5×25.5mm mounting hole spacing and an 8.8g weight. Connections include two UART pairs, micro USB, and support for a buzzer and LED lighting; onboard provisions include an LC filter, current meter and 16Mb Blackbox. The controller target is GEPRC_F411_AIO, and the ESC target is G_H_30 BLS. This is an electronics assembly for installation into a flight platform. The supplied configuration comprises one AIO board, an XT30-7CM-18AWG cable, a 35V220UF capacitor and eight M2*6.5mm damping rings.

Specifications

SpecificationValue & conditions
ModelGEPRC GEP-F411-35A AIO
Hardware architectureAll-in-one F411 flight controller with 35A 8-bit BLS ESC
Flight controller MCUSTM32F411
IMUICM42688-P(SPI)
Flight controller targetGEPRC_F411_AIO
OSDBetaflight OSD w/ AT7456Ev
OSD parameter adjustmentSupported
UART portsT1 R1 / T2 R2
Buzzer supportYes
LED supportYes
USB connectorMicro USB
ESC MCU8BB21F16G
LC filterIntegrated
Continuous current35A
Burst current40A(10s)10s burst duration.
Input voltage2~6S (LIPO Battery)LiPo battery input.
ESC protocolsDshot300/600,Oneshot,Multishot
Blackbox16Mb
ESC targetG_H_30 BLS
Board size32x32mm
Mounting hole spacing25.5×25.5mm
Weight8.8g
Motor suitability1204/1404/1507/1805/2004 motors
Propeller suitability2-5 inch propellers
ESC firmware familyBLHeli_S
Current meterIncluded
Included AIO board1 x GEP-F4-35A-AIOSupplied equipment.
Included cable1 x XT30-7CM-18AWG cableSupplied equipment.
Included capacitor1 x 35V220UF capacitorSupplied equipment.
Included damping rings8 x M2*6.5mm damping ringsSupplied equipment.
SOURCE WITH CHINADRONE

Request a quote for GEP-F411-35A AIO (F411 FC 35A 2-6S 8bits BLS ESC 25.5mm)

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
GEPRC TAKER F722 BLS 60A STACK flight controller and ESC board stack
Flight control & navigation

GEPRC TAKER F722 BLS 60A STACK

By GEPRC

The GEPRC TAKER F722 BLS 60A STACK is a UAV electronics assembly pairing an F722 flight controller with a four-in-one 60A ESC. Designed for direct DJI Air Unit connection, it supports 3–6S LiPo power and includes installation wiring and hardware. Both boards share a 30.5×30.5mm mounting pattern.

GEPRC TAKER G4 45A 8Bit AIO flight controller and ESC board with USB-C port
Flight control & navigation

GEPRC TAKER G4 45A 8Bit AIO

By GEPRC

The GEPRC TAKER G4 45A 8Bit AIO is a compact UAV flight control and ESC board supplied with a cable set. It combines a 170MHZ G473 controller, QF32MT ESC electronics and current sensing in a 9g package, with 2~6S LiPo input, a 45A continuous current rating and a defined mounting pattern.

GEPRC Fettec G4 Alpha GF50A STACK flight controller and ESC circuit board stack
Flight control & navigation

GEPRC Fettec G4 Alpha GF50A STACK

By GEPRC

The GEPRC Fettec G4 Alpha GF50A STACK is an FPV flight-control electronics package pairing a G4 Alpha controller with a GF50A four-in-one ESC. It provides SH1.0 connections, DJI digital and analog video integration, and 2~6S LiPo input support, with signal cables, power accessories and mounting hardware included.

GEPRC TAKER F722 BT 8Bit 60A STACK flight controller and ESC board assembly
Flight control & navigation

TAKER F722 BT 8Bit 60A STACK

By GEPRC

The GEPRC TAKER F722 BT 8Bit 60A STACK is a UAV electronics assembly pairing an F722 flight controller with a 60A four-in-one ESC. It provides 3–6S LiPo operation, onboard logging, a barometer and direct DJI Air Unit connection. Boards, cables and mounting hardware are supplied; the current batch lacks Bluetooth wireless parameter tuning.