Product overview
The GEPRC TAKER H743 BT 8Bit 80A STACK combines a TAKER H743 BT flight controller with a TAKER H80_BLS 80A four-in-one ESC for racing and freestyle UAV builds. Its STM32H743VIH6 processor uses a Cortex-M7 core running at up to 480MHz, paired with MPU6000 and ICM42688-P gyroscopes. Eight motor output ports provide support for X8 configurations, while firmware options include Betaflight, INAV and Ardupilot. The supplied configuration is an electronics stack with connection cables and mounting hardware, rather than a complete aircraft or an airframe kit.
Installation space must accommodate the 38.5×38.5mm flight controller and the larger 56.3×61.1mm ESC, both using 30.5×30.5mm mounting spacing. Both boards accept 3–6S LiPo input; the ESC has an 80A continuous rating and an 85A burst rating for five seconds. Integration features include a direct DJI Air Unit connection, Type-C USB, onboard logging, a barometer and seven UART groups, with UART3 assigned to Bluetooth. The current batch does not support Bluetooth wireless parameter tuning. Supplied accessories include a 50V 4700uF capacitor, signal cables, an XT90 power cable, screws, nuts and silicone pads.
Specifications
| Specification | Value & conditions |
|---|---|
| Flight controller model | TAKER H743 BT Flight Controller |
| Flight controller MCU | STM32H743 |
| Flight controller IMU | MPU6000 + ICM42688-P (dual gyro) |
| Black box storage | 512M onboard |
| OSD | BetaFlight OSD with AT7456E chip |
| Flight controller firmware target | GEPRC_TAKER_H743 |
| Flight controller dimensions and mounting | 38.5×38.5mm; mounting hole spacing 30.5×30.5mm |
| Flight controller input voltage | 3-6S LiPo |
| UART ports | 7 groupsUART3 fixed for Bluetooth. |
| Flight controller weight | 8.4g |
| ESC model | TAKER H80_BLS 80A 4IN1 ESC |
| ESC input voltage | 3-6S LiPo |
| ESC continuous current | 80A |
| ESC burst current | 85A5 seconds. |
| ESC control protocols | Dshot 150/300/600 |
| ESC dimensions and mounting | 56.3×61.1mm; mounting hole spacing 30.5×30.5mm; hole diameter 4mm, reduced to 3mm with silicone shock-absorbing ringsMounting holes become 3mm in diameter with silicone shock-absorbing rings installed. |
| ESC weight | 28.1g |
| ESC firmware target | B_X_30 |
| Bluetooth tuning limitation | Bluetooth wireless parameter tuning is not supported.Current batch; hardware adjustment update dated February 25, 2026. |
| Processor architecture and maximum clock | STM32H743VIH6; Cortex-M7 core; up to 480MHz |
| Motor outputs and X8 support | Eight motor output ports; compatible with X8 models |
| Supported flight firmware | Betaflight, INAV and Ardupilot |
| Air unit connection | Direct plug for DJI Air Unit |
| Barometer and USB interface | Barometer supported; Type-C USB interface |
| Power filtering | Integrated LC filter |
| ESC current sensing | Supported |
| Supplied controller, ESC and capacitor | 1 × TAKER H743 BT Flight Controller; 1 × TAKER H80_BLS 80A 4IN1 ESC; 1 × 50V 4700uF electrolytic capacitor |
| Supplied signal cables | 1 × DJI cable, SH1.0 6pin 100mm; 1 × FC adapter cable, SH1.0 8pin 30mm; 1 × receiver silicone cable, SH1.0 4pin 150mm; 1 × camera cable, SH1.0–SH1.25 3pin 60mm; 1 × VTX cable, SH1.0 4pin–6pin 100mm |
| Supplied power cable and mounting hardware | 1 × XT90 power cable, 10AWG 230mm; 4 × M3×30 screws; 4 × M3×25 screws; 8 × M3 nylon nuts; 12 × M3 silicone anti-shake pads |
| Connection design | Plug-and-play connections; no soldering required |
Request a quote for GEPRC TAKER H743 BT 8Bit 80A STACK
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
