Product overview
The GEPRC TAKER F405 BLS 60A STACK combines a GEP-F405-HD v2 flight controller with a GEP-BLS60A-4IN1 ESC for UAV electronics integration. It is an electronics assembly rather than a complete flight platform or airframe kit. The controller uses an STM32F405 MCU and an ICM42688-P IMU connected over SPI, with 16M onboard black box storage, six UARTs and a Type-C USB interface. Direct DJI Air Unit connection and the supplied adapter cable support installation without soldering that particular connection.
Installation requires space for the 36.8×36.8mm controller and 42.9×39.7mm ESC, both using a 30.5×30.5mm mounting pattern. Silicone grommets reduce the mounting holes from φ4mm to φ3mm. Both boards accept 3–6S LiPo power; the ESC specifies 60A continuous current and 65A for five seconds, with Dshot 150/300/600 support. The supplied assembly includes a capacitor, connection cables, XT60 power cable and mounting hardware. An integrated LC filter and dual BEC support peripheral power integration, although only the 5V@3A BEC output has a readable rating.
Specifications
| Specification | Value & conditions |
|---|---|
| Product identity and purpose | GEPRC TAKER F405 BLS 60A STACK; flight-control electronics stack designed for DJI Air Unit integration. |
| Stack architecture | GEP-F405-HD v2 flight controller paired with a GEP-BLS60A-4IN1 ESC. |
| Flight controller MCU | STM32F405 |
| Flight controller IMU | ICM42688-P(SPI) |
| Air Unit connection | Direct plugging into DJI Air Unit |
| Black box storage | 16M onboard |
| USB interface | Type-C |
| OSD | BetaFlight OSD with AT7456E chip |
| BEC | Dual BEC; 5V@3A is specified, while the second output rating is obscured. |
| Flight controller firmware target | GEPRCF405 |
| Flight controller dimensions and mounting | 36.8×36.8mm; mounting pattern 30.5×30.5mm; φ4mm holes, reduced to φ3mm with silicone shock-absorbing rings.Mounting holes become φ3mm after fitting silicone shock-absorbing rings. |
| Flight controller input voltage | 3-6S LiPo |
| UART count | 6 |
| Power filter | Integrated LC filter |
| Flight controller weight | 7.7g |
| ESC model and architecture | GEP-BLS60A-4IN1 ESC |
| ESC input voltage | 3-6S Lipo |
| ESC current sensing | Supported |
| ESC continuous current | 60A |
| ESC burst current | 65A5 seconds. |
| ESC control protocols | Dshot 150/300/600 |
| ESC dimensions and mounting | 42.9×39.7mm; mounting pattern 30.5×30.5mm; φ4mm holes, reduced to φ3mm with silicone shock-absorbing rings.Mounting holes become φ3mm after fitting silicone shock-absorbing rings. |
| ESC weight | 13.7g |
| ESC target | G_H_30 |
| Included electronics and cables | 1 flight controller, 1 ESC, 1 capacitor, 1 DJI Air Unit adapter cable, 1 flight controller adapter cable and 1 XT60 power cable.Supplied configuration. |
| Included mounting hardware and additional cables | 4 M3*30 screws, 4 M3*25 screws, 8 nylon nuts, 8 silicone grommets, 2 SH1.0 4-pin silicone cables and 1 camera connection cable.Supplied configuration. |
Request a quote for GEPRC TAKER F405 BLS 60A STACK
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
