Product overview
The GEPRC TAKER F722 BT 32Bit 50A STACK combines a GEP-F722-BT-HD V3 flight controller with a GEP-BL32 50A 96K four-in-one ESC for UAV flight-control and motor-control integration. It is supplied as an electronics stack. The controller uses an STM32F722 MCU and ICM42688-P SPI IMU, with a barometer, 512M onboard black box storage and BetaFlight OSD through an AT7456E chip. Integration connections include Type-C USB and a direct DJI Air Unit connection. Five UART groups are specified, with UART4 fixed for Bluetooth.
Installation space must accommodate the 36.9×36.9mm flight controller and the larger 42.5×42.1mm ESC, both using a 30.5×30.5mm mounting pattern. The controller’s 4mm mounting holes reduce to 3mm with silicone shock-absorbing rings. Board weights are 8.2g and 14g respectively. Both boards accept 3–6S LiPo input; the ESC specifies 50A continuous current and a 55A burst limited to five seconds, with Dshot 150/300/600 support. The package includes both boards, a capacitor, connection and power cables, screws, nylon nuts and silicone pads. The current batch does not support Bluetooth wireless parameter tuning because of temporary hardware adjustments.
Specifications
| Specification | Value & conditions |
|---|---|
| Product | GEPRC TAKER F722 BT 32Bit 50A STACK |
| Flight controller | GEP-F722-BT-HD V3 |
| Flight controller MCU | STM32F722 |
| Flight controller IMU | ICM42688-P(SPI) |
| Black box storage | 512M onboard |
| OSD | BetaFlight OSD with AT7456E chip |
| Flight controller BEC | 5V@3A, [email protected] dual BEC |
| Flight controller firmware target | GEPRCF722_BT_HD_V3 |
| Flight controller dimensions and mounting | 36.9×36.9mm; mounting pattern 30.5×30.5mm; hole diameter 4mm, reduced to 3mm with silicone shock-absorbing ringsMounting holes become 3 mm in diameter when silicone shock-absorbing rings are used. |
| Flight controller input voltage | 3-6S LiPo |
| Flight controller UART | 5 groups (UART4 fixed for Bluetooth)UART4 is fixed for Bluetooth. |
| Flight controller weight | 8.2g |
| ESC model | GEP-BL32 50A 96K 4IN1 ESC |
| ESC input voltage | 3-6S Lipo |
| ESC continuous current | 50A |
| ESC burst current | 55A (5 second)5-second burst. |
| ESC control protocols | Dshot 150/300/600 |
| ESC dimensions and mounting | 42.5×42.1mm; mounting pattern 30.5×30.5mm |
| ESC weight | 14g |
| ESC target | ST_G0_05 – 31.92 |
| Air Unit connection | Direct plug-in connection to the DJI Air Unit |
| Bluetooth limitation | Current batch does not support Bluetooth wireless parameter tuning.Current batch affected by temporary hardware adjustments; update dated February 25, 2026. |
| Barometer | Supported |
| USB interface | Type-C |
| Power filter | Integrated LC filter |
| ESC current sensing | Supported |
| ESC telemetry | Supported |
| Supplied electronics and cables | 1 FC board; 1 ESC board; 1 capacitor; 1 O3 3-in-1 connection cable; 1 FC adapter cable; 1 sh1.0 4pin silicone cable; 1 camera connection cable; 1 VTX connection cable; 1 XT60 power cable |
| Supplied mounting hardware | 4 M3*30 screws; 4 M3*25 screws; 8 nylon nuts; 12 silicone anti-shake pads |
Request a quote for TAKER F722 BT 32Bit 50A STACK
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
