Product overview
The FlashHobby D3530EVO Fixed Wing Motor is a brushless DC motor intended for fixed-wing propulsion integration. Its architecture uses a 12N14P configuration, with a stated 28 mm stator diameter and 8 mm stator height. Construction includes a CNC 6061-T6 aluminum bell, a 48H-grade magnet, NSK/NMB high-RPM bearings and high-temperature-resistant copper winding. The rotor undergoes a precision-balance test. Procurement configuration choices comprise 1100KV, 1400KV and 1700KV, alongside a custom-KV option; the product is a motor component rather than a flight platform or airframe kit.
Mechanical integration is constrained by conflicting physical specifications for the same model. Weight including wires is given as both 75.1 g and 55.7 g; motor dimensions as 35.3 × 30 mm and 28 × 26 mm; shaft dimensions as 5.0 × 47.5 mm and 3.0 × 41.0 mm; and mounting dimensions as 19 × 25 mm and 16 × 19 mm, both with M3 × 4 notation. No configuration distinction resolves these alternatives, leaving installation envelope, shaft interface, mounting geometry and mass ambiguous.
All three standard KV configurations specify 3–4S LiPo batteries. Suggested propellers are 8 inch for 1100KV and 1400KV, and 7 inch for 1700KV. Maximum power and current are respectively 380 W and 23.27 A, 663 W and 42.97 A, and 702.5 W and 44.92 A. No-load current is specified at 10 V and differs by winding configuration. Temperature figures apply specifically to motor surface measurements after 15 seconds at full throttle in a 26°C ambient environment, limiting their relevance to that operating condition.
Specifications
| Specification | Value & conditions |
|---|---|
| Weight | 75.1 g including wires; conflicting specification also gives 55.7 g including wires.Including wires; conflicting dimensions and mass are specified for the same model without a configuration distinction. |
| Alternative physical specification | 55.7 g including wires; motor 28 × 26 mm; shaft 3.0 × 41.0 mm; mount 16 × 19 mm (M3 × 4). These conflict with the other physical specifications.Conflicting physical specifications without a configuration distinction. |
| Motor dimensions | 35.3 × 30 mmConflicting physical specifications: alternative motor dimensions are 28 × 26 mm. |
| Shaft dimensions | 5.0 × 47.5 mmConflicting physical specifications: alternative shaft dimensions are 3.0 × 41.0 mm. |
| Stator diameter | 28 mm |
| Stator height | 8 mm |
| Motor mount | 19 × 25 mm (M3 × 4)Conflicting physical specifications: alternative mount dimensions are 16 × 19 mm (M3 × 4). |
| Motor configuration | 12N14P |
| KV options | 1100KV, 1400KV, 1700KV or custom KV |
| Maximum power | 380 W1100KV configuration. |
| Maximum current | 23.27 A1100KV configuration. |
| No-load current | 1.16 A at 10 V1100KV configuration; 10 V. |
| Resistance | 97.5 mΩ1100KV configuration. |
| Battery | 3–4S LiPo1100KV configuration. |
| Suggested propeller | 8 inch1100KV configuration. |
| Maximum power | 663 W1400KV configuration. |
| Maximum current | 42.97 A1400KV configuration. |
| No-load current | 1.77 A at 10 V1400KV configuration; 10 V. |
| Resistance | 54.4 mΩ1400KV configuration. |
| Battery | 3–4S LiPo1400KV configuration. |
| Suggested propeller | 8 inch1400KV configuration. |
| Maximum power | 702.5 W1700KV configuration. |
| Maximum current | 44.92 A1700KV configuration. |
| No-load current | 2.48 A at 10 V1700KV configuration; 10 V. |
| Resistance | 34.3 mΩ1700KV configuration. |
| Battery | 3–4S LiPo1700KV configuration. |
| Suggested propeller | 7 inch1700KV configuration. |
| Construction features | 48H-grade magnet; rotor precision-balance test; 14P12N high-torque design; CNC 6061-T6 aluminum bell; NSK/NMB high-RPM bearing; high-temperature-resistant copper wire winding |
| Temperature measurement conditions | Motor surface temperature measured at full throttle after 15 seconds, with ambient temperature of 26°C.Motor surface at 100% throttle after 15 seconds of running; ambient temperature 26°C. |
Request a quote for FlashHobby D3530EVO Fixed Wing Motor
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
