ChinaDroneRequest a quote →

EMAX Skyline F3+OSD Flight Controller (Acro)

The EMAX Skyline F3+OSD Flight Controller (Acro) integrates flight control and onboard OSD for FPV multirotor builds. Its STM32 F303 processor, receiver input options and direct camera and video transmitter connections support compact installations. Preinstalled MW_OSD enables PID adjustment through transmitter stick commands, while supplied cables and mounting hardware support assembly.

EMAXDrone flight controller
Weight
4.9 g

Get a free quote

Product overview

The EMAX Skyline F3+OSD Flight Controller (Acro) combines an STM32 F303 processor with onboard OSD for FPV multirotors. An FPV camera and video transmitter connect directly to the board, and a switch turns the OSD on or off. Preinstalled MW_OSD allows PID adjustments through transmitter stick commands and the OSD menu without connecting a computer. The controller supports quad, tri, hex and octo configurations, with PPM, Non-Inverted SBUS and PWM receiver inputs. Flight modes include Manual, Angle, Horizon, Head-Holding and Head-free.

The board measures 35mm x 35 mm x 5 mm with 30.5mm mounting and weighs 4.9g without wires. Its construction uses high-precision SMT, wire-to-board micro connectors and a built-in gyro/accelerometer, with 2MB of Blackbox storage. Supplied equipment comprises one Acro controller, two RC breakout cables, one vBat cable, one buzzer cable, two UART cables, four nylon standoffs and nuts, and a straight and 90-degree header pin assortment. Firmware flashing uses Micro-USB with the OSD switch OFF. GPS Hold and Return-To-Home require a GPS module.

Flight control & navigation

Specifications

EMAX Skyline F3+OSD Flight Controller (Acro) specifications
SpecificationValue & conditions
ProductEMAX Skyline F3+OSD Flight Controller (Acro)
Product code0103001021
Dimensions and mounting35mm x 35 mm x 5 mm (30.5mm Mounting)
Weight4.9gWithout wires.
Integrated OSDFlight controller with onboard OSD for FPV builds.
OSD switchingSwitch-controlled OSD on/off.
Video connectionsDirect FPV camera and video transmitter connections.
PID adjustmentPID adjustment through the OSD without a computer.With preinstalled MW_OSD, using transmitter stick commands and the OSD menu.
Firmware compatibilitySPRACINGF3 firmware compatibility, including Cleanflight, Baseflight, Betaflight and Raceflight.
ConnectorsWire-to-board micro connectors.
Motion sensorsBuilt-in gyro/accelerometer.
Blackbox storageBlackbox ready with 2MB of storable data.
ConstructionElectronic components assembled using high-precision SMT.
ProcessorSTM32 F303
Flight modesManual, Angle, Horizon, Head-Holding and Head-free modes.
Supported aircraft configurationsQuad, tri, hex, octo and various multirotor configurations.
RC inputsPPM, Non-Inverted SBUS, PWM
Firmware update interfaceFirmware flashing through Micro-USB.Leave the OSD switch OFF when using Micro-USB.
GPS functionsGPS Hold and Return-To-Home support.GPS module needed.
Included equipment1x SKYLINE F3+OSD (Acro); 2x RC breakout cable; 1x vBat cable; 1x buzzer cable; 2x UART cables; 4x nylon standoffs and nuts; 1x header pin assortment (straight and 90 degree).
Loaded softwareBaseflight and Baseflight-Configurator GUI.
Development tool limitationThe processor is not Atmel AVR; compilation through Arduino or other AVR tools is not supported.With firmware and configuration based on MultiWii software.

Related guides